Abstract:High-performance (Ti, Nb)B/Ti2AlNb composites are promising high-temperature structural materials for the new generation of aerospace engines. The interfaces between the (Ti, Nb)B reinforcement and matrix phases (i.e. O-Ti2AlNb, α2-Ti3Al and B2 phases) affect the mechanical properties of the composites largely. In this study, the properties of the interfaces were systematically revealed after fabricating a (Ti, Nb)B/Ti2AlNb composite by low-energy ball-milling and spark plasma sintering (SPS). A high-resolution transmission electron microscopy (HRTEM) was adopted to evaluate the crystallographic orientation relationships (ORs) and interfacial structures. (Ti, Nb)B maintains three coherent interfaces with the matrix, and the preferred ORs between them can be expressed as [1 1 <math>2¯</math> 0]α2//[0 1 0](Ti, Nb)B and (<math>1¯</math> 1 0 0)α2//(1 0 0)(Ti, Nb)B; [1 <math>1¯</math> 0]O//[0 1 0](Ti, Nb)B and (1 1 0)O//(1 0 0)(Ti, Nb)B; [1 <math>1¯</math> 1]B2//[0 1 0](Ti, Nb)B and (<math>1¯</math> 1 2)B2//(1 0 0)(Ti, Nb)B. The results of first-principles calculations indicated that the (<math>1¯</math> 1 0 0)α2/(1 0 0)(Ti, Nb)B interface possesses a higher bonding strength compared with the (1 1 0)O/(1 0 0)(Ti, Nb)B and (<math>1¯</math> 1 2)B2/(1 0 0)(Ti, Nb)B interfaces, and the (Ti, Nb)B reinforcement and the matrix are bonded through strong ionic bonds and weak covalent bonds. Moreover, based on Bramfitt's lattice mismatch theory, it was found that the (Ti, Nb)B reinforcement acts as an effective substrate in promoting the heterogeneous nucleation and preferred precipitation of the α2 phase. Suppressing the brittle α2 precipitate around the reinforcement improves the ductility of the composite obviously.

Interface and precipitate investigation of a TiB2 particle reinforced NiAl in-situ composite

In Situ Combustion Synthesis of TiB<sub>2</sub>-AIN Composites

High-Resolution Electron Microscope Observation of Interface Microstructure of A Cast Al-Mg-Si-Bi-Pb(6262)/Al2o3p Composite

Atomic-scale investigation of the interface precipitation in a TiB2 nanoparticles reinforced Al–Zn–Mg–Cu matrix composite

Investigation of the mechanical properties of TiC particle-reinforced Al-Cu alloys: insights into interface precipitation mechanisms and strengthening effects

Insight into the recrystallization behavior and precipitation reaction of in-situ nano TiB2/Al Cu Mg composite during heat treatment

TEM characterization of the precipitation reaction in Ti–48Al–10Nb alloy

Identification of a Cubic Precipitate in Γ-Titanium Aluminides

Study on Microstructure of the TiB 2 Reinforced NiAlFe Metal Matrix Composites

An Investigation of Microstructural Evolution, Tensile Properties and Work-Hardening Behavior of Nanosized TiB2/Al-Cu-Mn Composites

Effect of Nb and B on the Precipitation Behaviors in Al-Ti-Nb Balanced Ratio Ni-Based Superalloy: A Phase-Field Study

Formation mechanism of TiB2 nanoparticles and development of TiB2p/6201 nanocomposites as a neoteric conducting material

Effect of Ti/B on fabricating TiB2p/AZ91 composites by employing a TiB2p/Al master alloy

Crystallographic orientation relationships and interfacial structures between reinforcement and matrix phases in an in situ (Ti, Nb)B/Ti2AlNb composite

Preparation and Characterization of TiB2/Al3Ti/Al2O3 Composite Nano-powder

High-Resolution and Analytic Electron Microscopy Investigations on the Microstructure of A Tial (W, Si) Alloy

In-situ TiC/Ti composites based on Ti 2 AlC–Ti system: Reaction process, microstructure, and mechanical properties

Study on the Nucleation Mechanism of Carbonitrides on LaAlO 3 in GH4742 superallloy

Microstructural evolution and hydrogen content and their effect on properties of TiB 2 /Al-Li-X composites with different Li contents

TiAl3 nucleation mechanism and atomic-scale interface features in the Al/Ti composite structures

Enhancing strength-ductility synergy in nano-sized TiB 2 /Al composite via rapid solidification and thermo-mechanical processing