Abstract:High temperature titanium alloys are being urgently developed owing to the requirements of advanced aerospace industry. Performance of the alloys in service under high-temperature environments always attracts great attention. In this study, variations of microstructure and mechanical property in TC25 (Ti-6.5Al-2Mo-1Zr-1Sn-1 W-0.2Si) dual-phase high temperature titanium alloy subjected to thermal exposure have been systematically investigated by coupling microstructural characterization, compositional analyses and mechanical measurement. It is found that strength is significantly enhanced while ductility is sharply degraded when the alloy is thermally exposed at 550 degrees C for a long duration of 100 h. Microstructural observations manifest that ternary alpha-needles (alpha t) are drastically precipitated from beta-ligaments inside transformed beta-matrix (beta trans) whilst alpha 2 (Ti3Al)-phase is produced from primary alpha-phase (alpha p) through ordered transformation. The precipitation of alpha t-needles is promoted by beta-phase metastability resulting from insufficient element partitioning in the initial microstructure. The beta-phase stability also renders alpha t-precipitation encounter size effect of beta-ligaments, where the precipitation is suppressed when beta-ligaments are thin in size. Both precipitation of alpha t-needles and alpha 2-phase triggers precipitation-hardening effect, which results in strain localization and thereby regresses alloy ductility. However, further analysis indicates that compared with alpha 2-phase, alpha t-precipitation plays more adverse role in embrittlement in the current alloy. This is different from thermal-exposed behavior of most of high temperature titanium alloys reported in literatures. These findings enrich our fundamental understanding on thermal stability of high temperature titanium alloys, and provide plausible implication to improve high temperature performance via controlling phase precipitation.

Thermal stability and its effects on the mechanical properties of rapidly solidified Al-Ti alloys

Mechanical properties of rapidly solidified Al-Ti alloys after thermal exposure

Combined Effects of High Undercooling and Large Cooling Rate on the Microstructure Evolution and Hardening Mechanism of Rapidly Solidified Ti-Al Alloys

Contributions of the Particulate Reinforcement to Dry Sliding Wear Resistance of Rapidly Solidified Al-Ti Alloys

Microstructure Regulation and Strength-Elongation Synergy of the Near Alpha TZAM Alloy Via Thermomechanical Processing

Microstructural Evolution and Subsequent Mechanical Properties of Ti65 Titanium Alloy during Long-Term Thermal Exposure

The Evolution of Precipitates and Mechanical Properties in Rapidly Solidified 2195 Al–Cu–Li Alloy During Thermal Exposure

Influence of Ti Elements on the Evolution of Microstructure, Mechanical Properties and Thermal Stability of Al-Cu Alloy

Insights into Microstructural Stability and Embrittlement of TC25 High Temperature Titanium Alloy Subjected to Thermal Exposure

Influences of thermal exposure on the microstructural evolution and subsequent mechanical properties of a near-α high temperature titanium alloy

Thermal stability and mechanical properties of mechanically alloyed Al-10Ti alloy

Influence of thermal exposure on the microstructure evolution and mechanical behaviors of an Al-Cu-Li alloy

Influence of thermal exposure on the tensile properties and microstructures of Ti60 titanium alloy

Atypical Pathways for Lamellar and Twinning Transformations in Rapidly Solidified TiAl Alloy

Microstructures Thermal Stability and Evolution Mechanism of TiAl-Base Alloys and Their Effects on Mechanical Properties

Structural Stability,microstructure and Mechanical Behavior of Ti-10V-2Fe-3Al Alloy

Effect of Solution Temperature on Microstructures and Tensile Properties of High Strength Ti–6Cr–5Mo–5V–4Al Alloy

Effect of thermal exposure on microstructure and tensile properties of laser deposited Ti60A alloy

Microstructural stability of lamellar TiAl-based alloys at high temperature

Microstructural evolution and mechanical properties of the rapidly-solidified and hot-extruded 2196 Al-Li alloy

Metastable Phase Transformations and Mechanical Properties of an As-Extruded TiAl-based Alloy During Two-Step Heat Treatment