Abstract:Abstract To enable accurate characterization of the mechanical behavior of materials at the micro-scale, e.g., in micro-systems, experiments are required that are representative of the actual (often multi-axial) loading conditions to which these materials are subjected during fabrication and operation. Equally important is the acquisition of mechanical data in the form of multi-axial force measurements, and the measurement of kinematics by in-situ microscopic techniques. To this end, a micro-mechanical testing rig is here realized using commercially available piezoelectric actuators. It is shown that the setup measures forces with a resolution of $\sim 0.3$ ∼ 0.3 [mN] in the x - and y -directions, and $\sim 50$ ∼ 50 [mN] in the z -direction, over a range of 5 [N], yielding a high dynamic (force) range. Furthermore, displacements can be imposed with a resolution of $\sim 1$ ∼ 1 [nm] over a range of 200 [ μ m], in all three directions ( x , y , z ). The setup is compact, vacuum compatible, and specimens are loaded on top of the setup so that the field of view is unobstructed, allowing for in-situ testing with optical and scanning electron microscopy, and optical profilometry. A generic method is developed for extracting quasi-static forces from the piezoelectric actuators. Furthermore, challenges raised from the use of commercial actuators, for which the public technical specifications are generally incomplete, are overcome and the solution strategy is described. Proof-of-concept experiments on flexible, organic, light-emitting diodes demonstrate the potential of the setup to provide rich micro-mechanical data in the form of tri-axial force and displacement measurements. The commercial availability of the piezoelectric actuators, combined with the proposed engineering solutions lead to a generally accessible micro-mechanical test setup to investigate small-scale specimens under realistic, multi-axial loading conditions.

Micro-SAXS and force/strain measurements during the tensile deformation of single struts of an elastomeric polyurethane foam.

Space-resolved diffusing wave spectroscopy measurements of the macroscopic deformation and the microscopic dynamics in tensile strain tests

Rigid platform for applying large tunable strains to mechanically delicate samples

In situ synchrotron X-ray multimodal experiment to study polycrystal plasticity

OS5-2-3 an In-Situ Micro-Tension Setup and Its Application

An In-Situ, Micro-Mechanical Setup with Accurate, Tri-Axial, Piezoelectric Force Sensing and Positioning

A stretching apparatus with broad strain rate and temperature ranges for in-situ x-ray scattering measurements of polymers

Mechanical testing of colloidal solids with millipascal stress and single-particle strain resolution

A multi-mode stretching apparatus for in situ synchrotron x-ray scattering of polymer materials

Deformation induced changes in surface properties of polymers investigated by scanning force microscopy

Intermitted 3D diffraction tomography combined with in situ Laue diffraction to characterize dislocation structures and stress fields in micro bending cantilevers

In Situ and Real-Time Tensile Testing of Thin Films Using Double-Field-of-view Electronic Speckle Pattern Interferometry

Nanoscale rheology: Dynamic Mechanical Analysis over a broad and continuous frequency range using Photothermal Actuation Atomic Force Microscopy

Damage kinetics and compression behavior of Al alloy foam using in situ SRμCT

Micro-tensile tests on micromachined metal on polymer specimens: elasticity, plasticity and rupture

Novel method for mechanical characterization of polymeric nanofibers

Simultaneous Multiscale Measurements on Dynamic Deformation of a Magnesium Alloy with Synchrotron X-Ray Imaging and Diffraction

In-situ force microscopy to investigate fracture in stretchable electronics: insights on local surface mechanics and conductivity

AFM and Fluorescence Microscopy of Single Cells with Simultaneous Mechanical Stimulation via Electrically Stretchable Substrates

Multiscale Structural Characterization of a Smectic Liquid Crystalline Elastomer upon Mechanical Deformation Using Neutron Scattering

Immersed Cantilever Apparatus for Mechanics and Microscopy