Abstract:Although smart textile materials have significant importance because of their advanced technology, they haven’t replaced the conventional electronics completely. Nevertheless, these smart textile materials are now developed into the fabrication of in-situ structural health monitoring systems for structures and wearable technologies. The objective of this study was to develop a flexible microscale conductive fiber for in-situ strain monitoring applications by depositing uniform coating film of silver (Ag) nanoparticles on the surface each filament of nylon yarn by electroless plating process without jeopardizing the integrity of each material. The sensitivity of this Nylon/Ag conductive fiber was calculated experimentally, and the gauge factor (GF) was found to be in the range of 21–25 which showed a high sensitivity of the conductive fiber to the applied strain. Then, Nylon/Ag conductive fiber was fractured under tensile loading and a good agreement between the electromechanical response of the conductive fiber was found with repeatability of the results. Then, this Nylon/Ag conductive fiber was inserted in composite specimens at four different directions i.e. 0°, +45°, and 90° respectively in each ply and specimen was machined in a star shape in which each leg represented the direction of the individual position of the Nylon/Ag conductive fiber. The composite star specimen was then subjected to tensile cyclic loading and results showed excellent reproducibility in the mechanical behavior of composite specimens and electrical signals of each conductive fiber although, the conductive fiber in each position showed distinct response because of their respective direction. The increase or decrease in the resistance of the fiber sensor signified the presence of tensile or compressive strain respectively and the intensity of the signal quantified the amount of deformation. The results demonstrated the way to design a cost-effective microscale smart textile for strain monitoring. This Nylon/Ag conductive fiber can then be used in in-situ structural health monitoring even in high strain applications because of their good sensitivity, flexibility, and stability.

Light-Response Quantitative Trait Loci Identified with Composite Interval and eXtreme Array Mapping in Arabidopsis thaliana Sequence data from this article have been deposited with the EMBL/GenBank Data Libraries under accession nos. AY394847 and AY466496.

Novel technique for mechanical characterization of thin polymeric tissue membrane

Mechanical Characterization Device For In Situ Measurement Of Nanomechanical Properties Of Micro/Nanostructures

Nanoscale rheology: Dynamic Mechanical Analysis over a broad and continuous frequency range using Photothermal Actuation Atomic Force Microscopy

A Novel Technique for Mechanical Characterization of Thin Elastomeric Membrane

Self-Sensing Of Position-Related Loads In Continuous Carbon Fibers-Embedded 3d-Printed Polymer Structures Using Electrical Resistance Measurement

Nanostructure and Mechanical Measurement of Highly Oriented Lamellae of Melt-Drawn HDPE by Scanning Probe Microscopy

Nanomechanics of Advanced Polymer Fibres

A New Micro-Tensile System for Measuring the Mechanical Properties of Low-Dimensional Materials - Fibers and Films

Quantifying the interfacial load transfer in electrospun carbon nanotube polymer nanocomposite microfibers by using in situ Raman micromechanical characterization techniques

A Novel Nano-Spherical Tip for Improving Precision in Elastic Modulus Measurements of Polymer Materials via Atomic Force Microscopy

High-throughput measurement of elastic moduli of microfibers by rope coiling

Fellowship in Dental Surgery of the Royal College of Surgery of Edinburgh.

An integrated push-to-pull micromechanical device: Design, fabrication, and in-situ experiment

Mems/Nems Mechanical Characterization on Different Thin - Film Materials by Scanning along Micro-Machined Cantilevers

In-situ Strain Monitoring Performance of Flexible Nylon/Ag Conductive Fiber in Composites Subjected to Cyclic Tensile Loading

Carbon Nanotube Fibers: Monitoring a Micromechanical Process in Macroscale Carbon Nanotube Films and Fibers (adv. Mater. 5/2009)

Modeling and characterization of the mechanical properties of nanofiber yarn

A Stretching Force Control-Based Cyclic Loading Method for the Evaluation of Mechanical Properties of Gelation Methacrylate (GelMA) Microfibers

A New Characterization Approach to Study the Mechanical Behavior of Silicon Nanowires

Fabrication and Characterization of Electrically Conductive 3D Printable TPU/MWCNT Filaments for Strain Sensing in Large Deformation Conditions