Abstract:Multifunctional open-cell copper foams are widely used in different industrial sections and are featured by their topological microstructures, thus generating robust mechanicalproperties, sound absorption, andthermalconductivity. In this paper, making use of 3D imaging techniques based on micro-CT X-Ray tomography, in situ compression experiments are performed for exploring the deformation features and internal local failure behaviors of open-cell copper foams. During the in-situ compression process, geometrical topological features of deformed samples at different strain levels were reconstructed based on 3D X-ray computed tomography images, and four types of geometrical components were identified in the open-cell copper foam samples, namely strut, node, closed-cell and groove, respectively. Afterwards, several types of finite element models are constructed, finite element analysis is performed and compared with experiments for understanding the deformation process for porous copper samples. In order to improve the mesh quality of finite element models reconstructed from X-Ray tomography images, the mesh was generated through surface fitting technique. Then, the generated mesh was imported into finite element analysis software ABAQUS/Explicit for numerical simulation, simulation results suggest that large amounts of plastic strain localization and structure collapses are formed during the compression process, and such plastic strain localization features are closely related to the initial spatial orientation of struts.

Damage kinetics and compression behavior of Al alloy foam using in situ SRμCT

Research on Microstructure Evolution and Deformation for Closed-Cell Aluminium Foams in Compression by SXR-CT Technique

Mechanical Simulation of the Localized Deformation in the Aluminum Foams: A Three-Dimensional (3d) Structure Based Study

Internal microstructure evolution of aluminum foams under compression

Micro-CT Characterization of Structural Features and Deformation Behavior of Fly Ash/aluminum Syntactic Foam

Early Compressive Deformation of Closed-Cell Aluminum Foam Based on a Three-Dimensional Realistic Structure

Quasi-static Deformation Mechanism and Compressive Properties of Aluminum Foams Fabricated by Friction Stir Processing

Experimental study on cellular structure statistical analysis and uniaxial deformation behavior of closed-cell aluminum foam

Compression deformation behaviour of aluminium matrix syntactic foams under quasistatic loading: in situ SEM compressive tests

Mechanical Properties of Aluminum Foam Based on Synchrotron Radiation Computed-tomography

Investigations of the failure behaviors of open-cell copper foam based on in-situ X-ray tomography compression experiments and image reconstructed finite element modeling

Compressive Behaviour of Closed-Cell Aluminium Foam at Different Strain Rates

Microstructure evolution of Al-matrix composites during semi-solid compressive deformation revealed by synchrotron <i>in situ</i> CT

Microstructural Influence on Compressive Behavior and Strain Rate Sensitivity of Open-Cell Nickel Foam

The Strain Rate and Density Dependence of the Mechanical Properties of Closed-Cell Aluminum Foam

Analysis of the meso‐mechanical deformation behavior of Al foams and Ni/Al hybrid foams using time‐lapse μCT measurements and 3D Optical Flow

Study on Cell Deformation of Low Porosity Aluminum Foams under Quasi‐Static Compression by X‐Ray Tomography

Experimental investigation on the strain-rate effect and inertia effect of closed-cell aluminum foam subjected to dynamic loading

In-situ micro-compression of single-crystal aluminum alloy 6063

Enhancement in the Mechanical Properties of Newly Developed Ceramic Reinforced Al-Based Syntactic Foams: Analysis of Microstructure, Mechanical Response, and Energy Absorption Properties

Mechanical Properties and Constitutive Model Applied to the High-Speed Impact of Aluminum Foam That Considers Its Meso-Structural Parameters.