Abstract:3D IC heterogeneous integration technologies employ numerous materials with widely varying thermal and mechanical properties and distinct deformation behaviors. During 3D integration processes, the constituent materials undergo various thermal cycles. Because of thermal expansion coefficient mismatch, the materials are essentially subject to mechanical loadings for these thermal ramps. The resulting chip, package, and board interactions lead to 3D stack warpage, silicon mobility variation, and material damage. Under operation conditions, heat can be trapped between insulation layers and leads to nonuniform temperature rises. Elevated local temperatures can change carrier mobility, relax mechanical stress, and affect material deformation behaviors. Consequently, these local temperature rises can affect device performance, structure integrity, and material reliability. To accurately assess these thermal and mechanical effects, extract design rules, optimize designs, and develop performance and reliability mitigation methodologies, it is of paramount importance to characterize material deformation and interface de-bonding behaviors, map chip temperature distributions, and analyze stress hotspot evolutions during integration process and under operation conditions while developing 3D IC integration technologies [1]. In this study, a multiscale hierarchical modeling approach is assembled to analyze thermal, mechanical, and material deformation and interface de-bonding behaviors under 3D integration process and operation conditions for a newly designed 3D IC package with a 2nm SOC die copper-bonded on an RDL interposer [2]. The 3DIC structures are constructed directly using GDSII design and ITF technology data [3]. Each structural layer is divided into small smear tiles. Each tile is represented by anisotropic thermal and mechanical properties that depend on local feature patterns in the tile. Under given operation conditions, power grids are generated and used as heat sources for thermal analysis. For multiscale hierarchical modeling, the global thermal and mechanical analyses that call for coarse grain resolution are first performed. The subsequent local analyses that provide fine grain resolution in areas of interests utilize boundary conditions that are extracted from the global analyses. The material deformation and interface de-bonding behaviors are simulated using molecular dynamics [4]. Several 3D integration design options are explored. The 3D configuration effects on chip temperature distributions during operations, stack warpages, silicon mobility variations, and chip package interaction induced stress hotspots are examined. The elevated temperature impacts on material deformation and de-bonding process are also investigated. References: "Heterogenous Integration Roadmap", 2022, https://eps.ieee.org/hir "Heterogeneous Integration Enabled by the State-of-the-Art 3DIC and CMOS Technologies: Design, Cost, and Modeling", X. Lin et al., International Electron Devices Meeting, IEDM Technical Dig., 2021 "Sentaurus Interconnect User Guide", 2022, https://www.synopsys.com/silicon/tcad "Quantum ATK: An integrated platform of electronic and atomic-scale modelling tools", S. Smidstrup et al., J. Phys.: Condens. Matter 32, 015901, 2020

Multi-Scale Mechanical Probing Techniques To Investigate The Stability Of BEOL Layer Stacks With Sub-100 nm Structures

Computational Analysis of Mechanical and Electromigration Reliability Problems

Electro-Thermo-Mechanical Investigation On Multi-Level Interconnects In The Presence Of An Esd Pulse

A Cross-Layer Framework for Early-Stage Full Chip Oxide Breakdown Reliability Analysis

Mechanical BEoL Stability Investigation at Cu-Pillars under Cyclic Load

Chip Design For Coupled Nonlinear Structronic Thermo-Electro-Elastic/Control Systems

Microcracking in On-Chip Interconnect Stacks: FEM Simulation and Concept for Fatigue Test

The Stress Analysis and Parametric Studies for the Low-K Layers of a Chip in the Flip-Chip Process.

Surface Patterning for Multi-Scale Strain Analysis of In-Situ Sem Mechanical Experiments

(Invited) 3DIC Hierarchical Thermal and Mechanical Analysis with Continuum and Atomistic Modeling

Thermal Stress Analysis of the Low-K Layer in a Flip-Chip Package

Metal-Dielectric Stack Damage Evaluation Utilizing Acoustic Emission Signal Analysis

Fractures of Ultra-Low-k Material in a Chip During a Flip-Chip Process

Simulation and experiments of stress migration for Cu/low-k BEoL

Stress modeling of Cu/low-k BEoL - application to stress migration

Probing the interlayer mechanical coupling of 2D layered materials - A review

Three Dimensionial Surface Modelling: A Novel Analysis Technique for Non-Destructive X-Ray Diffraction Imaging of Semiconductor Die Warpage & Strain in Fully Encapsulated Integrated Circuits

Study on BEOL Failures in a Chip by Shear Tests of Copper Pillar Bumps

Stress Modeling for the Impacts of Flip Chip Process on the Ultralow-K Chips

An Optical Probe Stage and Its Applications in Mechanical Behavior Measurements of Micro-Objects and Thin Films

Micro/nano Scale Mechanical Tests Based on the Probe Platform