Abstract:Alloying is known as an effective strategy to improve the mechanical properties of metallic materials. Here we show that the microstructure and mechanical behavior of a TiZrNbHf1.6 high entropy alloy film can be highly tuned by Ni addition. The newly designed TiZrNbHf1.6Nix (x = 0, 0.4, 1.2, 1.8, 2.5, 3.0, 4.6) alloy films are synthesized by co-sputtering Ti, Zr, Nb, Hf and Ni elemental targets. The microstructure and mechanical behavior of the alloy films are investigated by X-ray diffraction (XRD), transmission electron microscopy (TEM), and nano/micro-indentations. The microstructural analysis indicates that the TiZrNbHf1.6 film has a single body-centered cubic with columnar-nanograined structure. As Ni content increases to 0.4 or above, the films show a complete amorphous structure. Our theoretical analysis shows that the transition from the crystalline to the amorphous structure can be attributed to the large atomic radius difference and the change of the thermodynamic parameters (e.g., mixing entropy and mixing enthalpy) due to the Ni addition. Compared to the TiZrNbHf1.6 film with a hardness of 4.8 GPa, a hardness increase of 8–35% is achieved in the Ni-doped alloy films (5.2–6.5 GPa) as measured by nanoindentation. The elevated hardness may be attributed to the severe lattice distortion and the amorphous structure induced by the Ni addition. Furthermore, microindentation reveals a diversity of deformation behavior in those films with different Ni content. A homogeneous deformation (slight plastic pileup) occurred in the films with Ni content of 1.2 and 4.6, which is close to the deformation behavior of the crystal TiZrNbHf1.6 film. While the film with a Ni content of 1.8 exhibits a catastrophic cracking deformation. Finally, multiple shear banding dominates the deformation of these films with Ni content of 0.4, 2.5 and 3.0. Our findings demonstrate that ultrastrong and highly deformable amorphous high entropy alloy thin films can be developed by appropriate element addition, making them promising materials for corrosion and wear-resistant coatings.

Microstructure, mechanical properties and tribological behavior of (TiZrHfNbTa)N x high entropy films deposited by magnetron sputtering

Plasma Bombardment-Induced Amorphization of (TiNbZrCr)Nx High-Entropy Alloy Nitride Films

Structure, Composition and Mechanical Properties of Reactively Sputtered (tivcrtaw)nx High-Entropy Films

Microstructures and properties of (TiCrZrVAl)N high entropy ceramics films by multi-arc ion plating

Effects of nitrogen content on microstructures and mechanical properties of (AlCrTiZrHf)N high-entropy alloy nitride films

Microstructure and properties of the AlCrMoZrTi/(AlCrMoZrTi)N multilayer high-entropy nitride ceramics films deposited by reactive RF sputtering

Microstructure and Mechanical Properties of TaN Thin Films Prepared by Reactive Magnetron Sputtering

Microstructure evolution and mechanical properties of refractory high-entropy alloy nitride film

Microstructure and mechanical properties of (AlCrTiZrV)Nx high-entropy alloy nitride films by reactive magnetron sputtering

Structural and Mechanical Properties of Multi-Element (alcrmotatizr)nx Coatings by Reactive Magnetron Sputtering

Microstructure, mechanical and tribological properties of TiCN nanocomposite films deposited by DC magnetron sputtering

Microstructure, mechanical and corrosion performance of magnetron sputtered (Al0.5CoCrFeNi)Nx high-entropy alloy nitride films

Effects of Nitrogen Content on the Structure and Mechanical Properties of (Al0.5CrFeNiTi0.25)Nx High-Entropy Films by Reactive Sputtering

Effects of the carbon-to-nitrogen ratio on the microstructure and properties of (CrNbSiTiZr)CxNy high-entropy carbonitride films

Effect of nitrogen pressure on the fabrication of AlCrFeCoNiCu0.5 high entropy nitride thin films via cathodic arc deposition

Effects of N element on the micro-structures and properties of (TiAlMoNbW)N high entropy nitride film

Tribological Properties of Ta‐C‐N and Ta‐N Thin Films

Evolutions of the Microstructure and Properties of the (CrMoNbTaZr)NX Films Prepared by Reactive Magnetron Sputtering: Effects of Stoichiometry and Crystallinity

Effects of substrate temperature and bias voltage on mechanical and tribological properties of cosputtered (TiZrHfTa)N x films

Nickel content-dependent microstructure and mechanical properties of TiZrNbHfNi high entropy alloy thin films

Synthesis of Medium Entropy Coatings and Study of the Influence of Bias Voltage and Nitrogen Flow on Their Microstructural and Tribological Properties