Abstract:High entropy alloy nitride coatings (HEAN), showing superior mechanical strength, high oxidation resistance, and thermal stability, have often been used in protective hard coatings field. However, the high temperature tribological field of novel HEA nitride films has not yet been well studied. The correlations among tribological properties, compressive residual stress, mechanical properties, and self-lubricating oxide are still limited.In this research, the novel (AlCrNbSiTiMo)N coatings were fabricated on both Inconel-718 and Si (100) substrate by radio frequency (RF) magnetron sputtering via tuning both substrate bias at 300 °C deposition temperature. The (AlCrNbSiTiMo)N coatings with a specific substrate bias exhibit an outstanding hardness of 34.5±0.8 GPa.In the wear test at 700 °C, the films deposited at −100 V revealed the lowest wear rate around 1.2 × 10−6 mm3N−1 m−1. With Molybdenum doping, the MoO3 Magnéli phase was observed on the surface at elevated temperature wearing process, and the friction coefficient at high temperature decreased significantly due to a lubricating surface. The coating exhibited the average friction coefficient value of 0.48 in the wear test of 700 °C. The high temperature tribological performance was addressed and related to the mechanical properties, the plastic deformation resistance H3/E2, and the excess residual stress of the films.This study provides a new design for hard coatings applied to severe wearing conditions. By tuning substrate bias, the (AlCrNbSiTiMo)N coatings exhibit outstanding mechanical and tribological characteristics, which will be a promising candidate for high temperature tribological protective film.

Microstructures and properties of (TiCrZrVAl)N high entropy ceramics films by multi-arc ion plating

Effects of nitrogen content on microstructures and mechanical properties of (AlCrTiZrHf)N high-entropy alloy nitride films

Microstructure and mechanical properties of (AlCrTiZrV)Nx high-entropy alloy nitride films by reactive magnetron sputtering

Microstructure and properties of the AlCrMoZrTi/(AlCrMoZrTi)N multilayer high-entropy nitride ceramics films deposited by reactive RF sputtering

Microstructure, mechanical properties and tribological behavior of (TiZrHfNbTa)N x high entropy films deposited by magnetron sputtering

Mechanical behavior, tribological properties, and thermal stability of (AlCrNbSiTiVZr)N high entropy alloy nitride coatings and their application to Inconel 718 milling

Structural and Mechanical Properties of Multi-Element (alcrmotatizr)nx Coatings by Reactive Magnetron Sputtering

Structure, Composition and Mechanical Properties of Reactively Sputtered (tivcrtaw)nx High-Entropy Films

Effects of the carbon-to-nitrogen ratio on the microstructure and properties of (CrNbSiTiZr)CxNy high-entropy carbonitride films

Improved tribological behavior of plasma-nitrided AlCrTiV and AlCrTiVSi high-entropy alloy films

Plasma Bombardment-Induced Amorphization of (TiNbZrCr)Nx High-Entropy Alloy Nitride Films

Microstructure, Mechanical Properties, Wear and Erosion Performance of a Novel High Entropy Nitride (AlCrTiMoV)N Coating Produced by Cathodic Arc Evaporation

Effect of nitrogen flow rate on the microstructure, mechanical and tribological properties of CrAlTiN coatings prepared by arc ion plating

Microstructure evolution and mechanical properties of refractory high-entropy alloy nitride film

Structure and Properties of Two Al–Cr–Nb–Si–Ti High-Entropy Nitride Coatings

Microstructures and Wear Resistance of CoCrFeNi2V0.5Tix High-Entropy Alloy Coatings Prepared by Laser Cladding

Mechanical Properties of Ti(C(0.7)N(0.3)) Film Produced by Plasma Electrolytic Carbonitriding of Ti6al4v Alloy

Mechanical, tribological and anti-corrosion properties of AlCrNbSiTi high entropy coatings with various nitrogen fluxes and application to nickel-based alloy milling

Mechanical, Tribological, and Corrosion Resistance Properties of (TiAlxCrNbY)Ny High-Entropy Coatings Synthesized Through Hybrid Reactive Magnetron Sputtering

Improvement of high entropy alloy nitride coatings (AlCrNbSiTiMo)N on mechanical and high temperature tribological properties by tuning substrate bias

Wear and high-temperature oxidation resistance of (AlCrFeTiV)100-xNix high-entropy alloy coatings prepared by laser cladding on Ti6Al4V alloy