Abstract:HfO2-based resistive random-access memory (RRAM) with a Ti buffer layer has been extensively studied as an emerging nonvolatile memory (eNVM) candidate because of its excellent resistive switching (RS) properties and CMOS process compatibility. However, a detailed understanding of the nature of Ti thickness-dependent RS and systematic thermal degradation research about the effect of post-metallization annealing (PMA) time on oxygen vacancy distribution and RS performance still needs to be included. Herein, the impact of Ti buffer layer thickness on the RS performance of the Al/Ti/HfO2/TiN devices is first addressed. Consequently, we have proposed a simple strategy to regulate the leakage current, forming voltage, memory window, and uniformity by varying the thickness of the Ti layer. Moreover, it is found that the device with 15 nm Ti shows the minimum cycle-to-cycle variability (CCV) and device-to-device variability (DDV), good retention (105 s at 85 °C), and superior endurance (104). In addition, thermal degradation of the Al/Ti(15 nm)/HfO2/TiN devices under different PMA times at 400 °C is carried out. It is found that the leakage current increases and the forming voltage and memory window decrease with the increase in PMA time due to the thermally activated oxidation of the Ti. However, when the PMA time increases to 30 min, the Ti can no longer capture oxygen from HfO2 due to the formation of self-limited TiOx. Therefore, the device shows superior thermal stability with a PMA time of 90 min at 400 °C and no degradation of the memory window, uniformity, endurance, or retention. This work demonstrates that the Ti/HfO2-based RRAM shows superior back-end-of-line compatibility with high thermal stability up to 400 °C for over an hour.

Suppression of Threshold Voltage Variation by H2 Plasma Improved KrF Photoresist Profile

Ti/HfO2-Based RRAM with Superior Thermal Stability Based on Self-Limited TiOx

KrF Photoresist Profile Modulation by NH 3 Plasma Treatment for 28 nm SRAM

Improvement in Performance and Reliability with Cf4 Plasma Pretreatment on the Buffer Oxide Layer for Low-Temperature Polysilicon Thin-Film Transistor

Nitrogen-induced improvement of resistive switching uniformity in a HfO2-based RRAM device

Kr-Plasma Process for Conductance Control of MFSFET With FeND-HfO2 Gate Insulator

Charge neutral MoS2 field effect transistors through oxygen plasma treatment

Improvement of HfOx-Based RRAM Device Variation by Inserting ALD TiN Buffer Layer

Improvement of Hafnium Oxide Resistive Memory Performance Through Low-Temperature Supercritical Oxidation Treatments

Trend of Subthreshold Swing with DPN Process for 28nm N/PMOSFETs

Electroforming-Free and Highly Uniform Al2o3 Resistive Random Access Memory by Ald-Based in Situ Hydrogen Plasma Treatment

Remote N-2 Plasma Treatment to Deposit Ultrathin High-K Dielectric As Tunneling Contact Layer for Single-Layer MoS2 MOSFET

Suppression of Relaxation Effect in HfO2 Resistive Random Access Memory Array by Improved Program Operations

Highly uniform resistive switching characteristics of KGM resistive memory through air plasma technology

Electrical stress probing recovery efficiency of 28 nm HK/MG nMOSFETs using decoupled plasma nitridation treatment

Back-Side Stress to Ease p-MOSFET Degradation on e-MRAM Chips

Tuning oxygen vacancies and resistive switching properties in ultra-thin HfO2 RRAM via TiN bottom electrode and interface engineering

Decoupled Plasma Nitridation (DPN) and Postnitridation Annealing (PNA) Treatment for Metal Boundary Effect Reduction

Study on the electric field modulation effect of ultrathin alumina layer

Comparative Study on Graded-Barrier AlxGa1-xN/AlN/GaN/Si Metal-Oxide-Semiconductor Heterostructure Field-Effect Transistor by Using Ultrasonic Spray Pyrolysis Deposition Technique

High energy electrons induced by nonlinear effect in synchronized dual-level radio frequency pulsing capacitively coupled plasmas