Abstract:Modern industry has become increasingly reliant on composite materials for a variety of applications, and the nuclear industry is no exception to this. Among the materials being researched as Enhanced Accident Tolerant Fuels, ceramic matrix composites such as SiC-fiber-reinforced SiC (SiCf/SiC) figure as some prime candidates due to their excellent high temperature performances. SiCf/SiC so far shows adequate nuclear, mechanical and chemical properties; still, the thermal properties need further investigation. The thermal behavior of a material is an important factor for its performance as a nuclear fuel cladding, i.e. the first barrier encapsulating the fuel pellets. Many features determine the resulting properties of composite materials, such as matrix and fiber reinforcement properties and orientation, void fraction, and pore morphology. This study establishes a methodology to study the physical properties of composite materials and applies it to SiCf/SiC. A FEM model is used to characterize the thermal properties of a fundamental SiCf/SiC element, referred to as a �unit cell�, with the objective of accurately predicting the thermal properties of this complex class of materials where experimental data is often difficult to obtain. The unit cell is built based on data acquired with high-resolution tomographic microscopy performed at the TOMCAT beamline of the Swiss Light Source. By using phase-retrieval prior to tomographic reconstruction, the pores, fibers and matrix that compose the material can be distinguished in the data analysis. The separated information is processed to obtain geometrical information about the individual pores and fibers, which is then used to parametrize them as cylindrical objects. This allows constructing a FEM model of a cubic unit cell that is used to extract the effective thermal properties of SiCf/SiC. The analysis scheme includes steady-state and dynamic thermal transport simulations, which yield directional effective thermal conductivity and diffusivity values, respectively. Both modes of analysis show isotropic thermal conductivity values in the range of 71 W/m/K at room temperature, more than three times that of currently employed nuclear cladding materials. Combining these results with the data on the larger structural features of the material will lead to realistic results on the macroscopic thermal properties.

Characterization of damage mechanisms in CVI-SiC/SiC composite tubes by X-ray tomography

In situ high-temperature 3D imaging of the damage evolution in a SiC nuclear-fuel cladding material

In situ tomographic study of a 3D-woven SiC/SiC composite part subjected to severe thermo-mechanical loads

Advanced Analytics on 3D X-ray Tomography of Irradiated Silicon Carbide Claddings

Characterisation of damage evolution in plain weave SiC/SiC composites using in situ X-ray micro-computed tomography

Analysis of Multi-scale Failure Behavior of SiC f /SiC Composite Clad Tube under Flexible Clamping Damage

Modeling of the damage and fracture behaviors of a SiC triplex tube during the burst test with elastomeric insert

In situ X-ray computed micro-tomography imaging of failure processes in Cr-coated Zircaloy nuclear fuel cladding materials

Failure Evaluation of a SiC/SiC Ceramic Matrix Composite During In-Situ Loading Using Micro X-ray Computed Tomography

FEM heat transfer modelling with tomography-based SiCf/SiC unit cell

Research on damage evolution mechanisms under compressive and tensile tests of plain weave SiC f /SiC composites using in situ X-ray CT

Hoop tensile properties and crack propagation investigation of 2D braided SiC f /SiC composite tubes: Experiments and simulations

Multi-scale Progressive Damage and Failure Behavior Analysis of Three-Dimensional Winding SiC Fiber-Reinforced SiC Matrix Composite Tube

X-ray microtomography analysis of the damage mechanisms in 3D circular braided carbon fiber/epoxy resin composite tubes under axial impact compression

Hermeticity of SiC/SiC composite and monolithic SiC tubes irradiated under radial high-heat flux

In situ Observation of Compression Damage in a Three-Dimensional Braided Carbon Fiber Reinforced Carbon and Silicon Carbide (C/C-SiC) Ceramic Composite

Application of X-ray microcomputed tomography in the characterization of irradiated nuclear fuel and material specimens

Study on frictional behavior of SiCf/SiC composite clad tube clamping condition under nuclear irradiation

Multiscale Modeling of SiCf/SiC Nuclear Fuel Cladding Based on FE-Simulation of Braiding Process

Multiscale Failure Mechanism Analysis of SiC Fiber-Reinforced TC17 Composite Subjected to Transverse Tensile Loading at Elevated Temperature

3D in situ observation of the capillary infiltration of molten silicon in a SiC/SiC composite by X-ray tomography