Abstract:Silicon carbide (SiC) is a promising structural and cladding material for accident tolerant fuel cladding of nuclear reactor due to its excellent properties. However, when exposed to severe environments (e.g., during neutron irradiation), lattice defects are created in amounts significantly greater than normal concentrations. Then, a series of radiation damage behaviors (e.g., radiation swelling) appear. Accurate understanding of radiation damage of nuclear materials is the key to the design of new fuel cladding materials. Multi-scale computational simulations are often required to understand the physical mechanism of radiation damage. In this work, the effect of neutron irradiation on the volume swelling of cubic-SiC film with 0.3 mm was studied by using the combination of molecular dynamics (MD) and rate theory (RT). It was found that for C-vacancy (CV), C-interstitial (CI), Si-vacancy (SiV), Si-interstitial (SiI), and Si-antisite (SiC), the volume of supercell increases linearly with the increase of concentration of these defects, while the volume of supercell decreases linearly with the increase of defect concentration for C-antisite (CSi). Furthermore, according to the neutron spectrum of a certain reactor, one RT model was constructed to simulate the evolution of point defect under neutron irradiation. Then, the relationship between the volume swelling and the dose of neutrons can be obtained through the results of MD and RT. It was found that swelling typically increases logarithmically with radiation dose and saturates at relatively low doses, and that the critical dose for abrupt transition of volume is consistent with the available experimental data, which indicates that the rate theory model can effectively describe the radiation damage evolution process of SiC. This work not only presents a systematic study on the relationship between various point defect and excess volume, but also gives a good example of multi-scale modelling through coupling the results of binary collision, MD and RT methods, etc., regardless of the multi-scale modelling only focus on the evolution of primary point defects.

Modeling of the damage and fracture behaviors of a SiC triplex tube during the burst test with elastomeric insert

Analysis of Multi-scale Failure Behavior of SiC f /SiC Composite Clad Tube under Flexible Clamping Damage

Multi-scale Progressive Damage and Failure Behavior Analysis of Three-Dimensional Winding SiC Fiber-Reinforced SiC Matrix Composite Tube

Hoop tensile properties and crack propagation investigation of 2D braided SiC f /SiC composite tubes: Experiments and simulations

Fracture behavior of SiC f /SiC cladding with prefabricated cracks on the inner/outer wall

In situ high-temperature 3D imaging of the damage evolution in a SiC nuclear-fuel cladding material

Multiscale Modeling of SiCf/SiC Nuclear Fuel Cladding Based on FE-Simulation of Braiding Process

Study on frictional behavior of SiCf/SiC composite clad tube clamping condition under nuclear irradiation

Quasi-static Axial Crushing and Transverse Bending of Double Hat Shaped CFRP Tubes

A Multi-Scale Simulation Study of Irradiation Swelling of Silicon Carbide

Piecewise damage model for SiC/SiC composites with multilevel experimental validation

Multiscale Failure Mechanism Analysis of SiC Fiber-Reinforced TC17 Composite Subjected to Transverse Tensile Loading at Elevated Temperature

Investigation on crack propagation of SiCf/SiC composite via PF-CZM method

Characterization of damage mechanisms in CVI-SiC/SiC composite tubes by X-ray tomography

Experimental and numerical studies on low-velocity impact of laminated C/SiC structures

Hermeticity of SiC/SiC composite and monolithic SiC tubes irradiated under radial high-heat flux

Primary Radiation Damage in 3C-Sic under Strain Field Studied with Molecular Dynamics Simulation

Strength damage behavior analysis of silicon carbide(SiC) ceramic cylindrical shells under hydrostatic pressure based on the state-based peridynamics

Experimental investigation of probabilistic failure of SiC/SiC composite tubes under multiaxial loading

Deformation and fracture of SiCp/Al composites under complex loading conditions: A simulation study

A Monte Carlo simulation of damage and failure process with crack saturation for unidirectional fiber reinforced ceramic composites