Abstract:Composite mechanical joints are extensively used and becoming crucial components for primary and secondary structures in industry. Considerable efforts have been contributed to the failure behavior of resin matrix laminate composite bolt joint, but few ones refer to carbon matrix woven composites. In current work, a comprehensive experimental and numerical research on the failure behavior for satin woven carbon/carbon composites under pin-loading, which is the typical loading case for mechanical joint, was presented. Seven types of specimens with different configuration were tested to evaluate the influence of the geometry on the failure modes. The testing results stated that, with the increasing of width-to-hole diameter ratio (W/D) and edge distance-to-hole diameter ratio (E/D), the net tension and shear out failure transformed into the bearing failure respectively, while hole diameter-to-thickness ratio (D/t) hardly affect the failure mode. For a further exploration for damage mechanism of the acceptable bearing failure in engineering, damage accumulation and evolution were assessed combining numerical simulation and acoustic emission monitoring. In view of the complexity of satin woven framework, the hierarchical multiscale numerical strategy from micro-to macro-level was proposed to obtain the material mechanical performance. In order to acquire reliable prediction and consider the effects of the uncertainty sources on composite properties, the model geometry reconstruction was performed using X-ray tomography. Meanwhile, the fiber and void random distributions were determined via the Random Sequential Adsorption algorithm. The Murakami-Ohno damage theory was adopted to characterize the damage propagation. It is concluded that, the numerical prediction agreed with the testing results reasonably well, and the main damage mechanism during the bearing failure included matrix cracking, yarns pulling-out and yarns fracture matching various amplitude ranges of acoustic emission signals.

Experimental investigation of probabilistic failure of SiC/SiC composite tubes under multiaxial loading

Micromechanics-based Progressive Failure Analysis of Carbon FIber/epoxy Composite Vessel under Combined Internal Pressure and Thermomechanical Loading

Quasi-static Axial Crushing and Transverse Bending of Double Hat Shaped CFRP Tubes

Analysis of Multi-scale Failure Behavior of SiC f /SiC Composite Clad Tube under Flexible Clamping Damage

Multi-scale Progressive Damage and Failure Behavior Analysis of Three-Dimensional Winding SiC Fiber-Reinforced SiC Matrix Composite Tube

In situ investigation of failure in 3D braided SiCf/SiC composites under flexural loading

Fatigue behavior and damage analysis of PIP C/SiC composite

In situ mechanical testing of an Al matrix composite to investigate compressive plasticity and failure on multiple length scales

Experimental and Numerical Study on the Bending Behavior of Satin-Woven SiCf/SiC Composites

Biaxial tensile failure of short carbon-fibre-reinforced PEEK composites

Modeling of the damage and fracture behaviors of a SiC triplex tube during the burst test with elastomeric insert

The thermo-mechanical coupling failure mechanisms of C/SiC riveted joint considering deposited SiC matrix and interference fit

Deformation and fracture of SiCp/Al composites under complex loading conditions: A simulation study

Experimental and numerical studies on low-velocity impact of laminated C/SiC structures

Damage Analysis of a SiCf/SiC Ceramic Matrix Composite under Stepwise Fatigue Loading with Acoustic Emission

Damage mechanism identification and failure behavior of 2D needle-punched SiC f /SiC composites based on acoustic emission and digital image correlation

Piecewise damage model for SiC/SiC composites with multilevel experimental validation

Damage and failure analysis of a SiCf/SiC ceramic matrix composite using digital image correlation and acoustic emission

Damage Evolution and Fracture Behavior of C/SiC Minicomposites with Different Interphases under Uniaxial Tensile Load

A Quantitative Representation of Damage and Failure Response of 3D Textile SiC/SiC Ceramics Matrix Composites Subjected to Flexural Loading

Experimental and Multiscale Numerical Investigation on Failure Behavior of Satin Woven Carbon/carbon Composites Subjected to Pin-Loading