Catalytic gasification of wet municipal solid waste with HfO2 promoted Ni-CaO catalyst for H2-rich syngas production

Muhammad Irfan,Aimin Li,Lei Zhang,Guozhao Ji,Yuan Gao
DOI: https://doi.org/10.1016/j.fuel.2020.119408
IF: 7.4
2021-02-01
Fuel
Abstract:<p>Catalytic gasification, coupled with in-situ CO<sub>2</sub> capture over Ni-CaO catalyst, is considered to be an effective approach for H<sub>2</sub>-rich and tar-free syngas production. However, the poor stability of Ni-CaO based catalyst raises a question regarding its large scale application. In this study, HfO<sub>2</sub> was used as a stabilizer and promoter for the Ni-CaO catalyst system. The stability of catalyst was evaluated through cyclic carbonation-calcination test with a thermogravimetric analyzer. The results showed that HfO<sub>2</sub> incorporated catalysts performed better stability towards cyclic CO<sub>2</sub> capture. The effect of different HfO<sub>2</sub> additions in catalyst, catalyst to municipal solid waste (C/MSW) ratio, gasification temperature, and moisture content (MC) of MSW was investigated on syngas composition, H<sub>2</sub> yield, dry gas yield (DGY) and product distribution (syngas, tar and char). The results indicated that H<sub>2</sub> yield was improved from 212 mL/g (without catalyst) to 442 mL/g with Ni-CaO (NC) catalyst and further improved with the application of HfO<sub>2</sub> promoted catalysts (Ni-CaO-HfO<sub>2</sub>). The catalyst with 20% HfO<sub>2</sub> (NCH-20) exhibited maximum H<sub>2</sub> yield of 597 mL/g. Moreover, a significant reduction in tar content from 8.79 wt% (without catalyst), 3.19 wt% (with Ni-CaO) to 2.81 wt% (with NCH-20) was also recorded with HfO<sub>2</sub> promoted catalysts.</p>
energy & fuels,engineering, chemical
What problem does this paper attempt to address?