Abstract:The gasification of municipal solid waste (MSW) in the presence of a Ni-CaO catalyst is a promising approach for in situ CO2 capture along with enhanced H-2 syngas production. However, the instability of the catalyst-sorbent matrix is a challenging obstacle for the gasification process. The direct current (dc) arc plasma melting method was employed to prepare a series of bifunctional catalysts (Ni-CaO) with varied Ni loadings, while TiO2 as polymorphic transition material was added to promote the stability of the catalyst. The catalyst samples were evaluated for cyclic CO2 capture and catalytic gasification of MSW using thermogravimetric analysis (TGA) and a fixed-bed reactor, respectively. The obtained results showed that the addition of TiO2 into Ni-CaO catalyst-sorbent led to improvements in the stability of catalyst for CO2 capture. The gasification performance of a bifunctional Ni-CaO-TiO2 catalyst was evaluated on the basis of Ni loading, the catalyst to MSW (C/M) ratio, temperature, and steam rate. The results indicated that, after the addition of a Ni-CaO-TiO2 catalyst (20% Ni loading), the dry gas yield (DGY) increased from 0.75 to 1.74 Nm(3)/kg and H-2 concentration increased from 35.1 to 57.7%. Meanwhile, the tar content decreased from 9.38 to 2.55% with the addition of the catalyst. The significant influences of Ni loading, C/M ratio, gasification temperature, and steam on product composition and characteristics were also evaluated. Tar analysis indicated that steam and catalyst addition resulted in tar reduction, which led to a higher DGY. Moreover, an unconventional method (i.e., thermal plasma technique) was employed for the catalyst preparation, which demonstrated promising results for MSW gasification with an industrial application prospect.

Enhancing CO 2 gasification-reforming of municipal solid waste with Ni/CeO 2 and Ni/ZrO 2 catalysts

Enhancing CO2 Gasification-Reforming of Municipal Solid Waste with Ni/CeO2 and Ni/ZrO2 Catalysts

High-performance Ni-Ce<sub>1-<i>x</i></sub>Zr<sub><i>x</i></sub>O<sub>2</sub> nanoparticles for biogas reforming: enhanced CO<sub>2</sub> activation and stability

Enhancement of hollow Ni/CeO2-Co3O4 for CO2 methanation: From CO2 adsorption and activation by synergistic effects

Hydrogen-rich syngas from wet municipal solid waste gasification using Ni/Waste marble powder catalyst promoted by transition metals

Ceria engineering in nickel catalysts to improve CH 4 selectivity and yield for CO methanation

Enhanced H2 Production from Municipal Solid Waste Gasification Using Ni–CaO–TiO2 Bifunctional Catalyst Prepared by Dc Arc Plasma Melting

Methane Reforming with Co2 to Syngas over Ceo2-Promoted Ni/Al2o3-Zro2 Catalysts Prepared Via A Direct Sol-Gel Process

Enhancing Carbon Dioxide Conversion in Methane Dry Reforming Multistep Reactions Through Transformation of Active Species on Catalyst Surface

CO2 reforming with ethanol for syngas production over SiO2‐M@CeO2 catalysts (M: Cu,Ni): Impact of active metal

Catalytic gasification of wet municipal solid waste with HfO2 promoted Ni-CaO catalyst for H2-rich syngas production

Mesoporous Nanocrystalline Ceria–zirconia Solid Solutions Supported Nickel Based Catalysts for CO2 Reforming of CH4

Exploring enhanced syngas production via the catalytic performance of metal‐doped X‐Ni/CeO2 (X = Zr, La, Sr) in the dry reforming of methane

Enhanced Ni–Ce Interactions to Enable Efficient Low-Temperature Catalytic CO2 Methanation

Carbon Dioxide Reforming of Methane over Ni-based Catalyst

Confining Ni and ceria in silica shell as synergistic multifunctional catalyst for methane dry reforming reaction

Stabilizing Ni catalysts in biogas reforming via in situ carbon deposit removal by CeO2 oxygen vacancies

CO Rich Syngas Production from Catalytic CO2 Gasification-Reforming of Biomass Components on Ni/CeO2

Synergistic Effects of Co-Gasification of Municipal Solid Waste and Biomass in Fixed-Bed Gasifier

Biogas Reforming on Hydrotalcite-Derived Ni-Mg-Al Catalysts: the Effect of Ni Loading and Ce Promotion

Reducing Carbon Deposition and Enhancing Reaction Stability by Ceria for Methane Dry Reforming over Ni@SiO2@CeO2 Catalyst