Abstract:CO2 gasification-reforming is a promising approach for the transformation of carbonaceous materials into CO-rich syngas. Within municipal solid waste and agricultural waste streams, plastics are commonly found intermixed with biomass waste. This study delves into the CO2 gasification-reforming of biomass (cellulose) and various plastics (PET, HDPE, and PS) using a self-built online weighing fixed bed reactor and a two-stage fixed bed reactor. During the gasification-reforming of cellulose-plastic mixtures without the catalyst, the experimental gas production rate of cellulose slightly decreased, with the peak of gas production migrating to a higher temperature range. This phenomenon can be attributed to the molten plastic adhering to the cellulose surface, which impeded heat and mass transfer essential for cellulose decomposition. Furthermore, the gas production from plastics was suppressed in the mixtures, likely due to the interference of cellulose char in the decomposition of plastics. The incorporation of 2%Ni/CeO2 catalysts not only augmented gas yields and production rates but also emphasized the synergistic interactions. For the cellulose-HDPE mixture, the total gas yield was reduced by 14.9 mmol gsample −1 relative to the theoretical value. Given that HDPE possessed the highest decomposition temperature, the synergistic interaction was predominantly driven by the inhibitive nature of cellulose char. In contrast, the total gas yields for cellulose-PET and cellulose-PS mixtures increased by 8.7 mmol gsample −1 and 13.3 mmol gsample −1, respectively. The free radicals emanating from cellulose could trigger the decomposition of volatile components from plastics. Concurrently, the decomposition products of plastic could serve as hydrogen donors to stabilize the volatiles of cellulose. The interactions primarily affect the volatiles and tar components of the mixtures. The catalysts amplified gas yields by facilitating the CO2 reforming of tar, therefore, the synergistic interaction became evident upon catalyst addition. Gas chromatography-mass spectrometry analyses of the tar also corroborated the described interaction mechanisms between cellulose and plastics. Thermogravimetric analysis of used catalysts indicated that the synergistic action between cellulose and plastic could effectively diminish coke deposition, thereby preventing swift catalyst deactivation.

Enhancing CO2 Gasification-Reforming of Municipal Solid Waste with Ni/CeO2 and Ni/ZrO2 Catalysts

Enhancing CO 2 gasification-reforming of municipal solid waste with Ni/CeO 2 and Ni/ZrO 2 catalysts

Enhanced H2 Production from Municipal Solid Waste Gasification Using Ni–CaO–TiO2 Bifunctional Catalyst Prepared by Dc Arc Plasma Melting

CO Rich Syngas Production from Catalytic CO2 Gasification-Reforming of Biomass Components on Ni/CeO2

Hydrogen-rich syngas from wet municipal solid waste gasification using Ni/Waste marble powder catalyst promoted by transition metals

Biogas Reforming on Hydrotalcite-Derived Ni-Mg-Al Catalysts: the Effect of Ni Loading and Ce Promotion

Ceria engineering in nickel catalysts to improve CH 4 selectivity and yield for CO methanation

Synergistic interactions between cellulose and plastics (PET, HDPE, and PS) during CO2 gasification-catalytic reforming on Ni/CeO2 nanorod catalyst

Methane Reforming with Co2 to Syngas over Ceo2-Promoted Ni/Al2o3-Zro2 Catalysts Prepared Via A Direct Sol-Gel Process

Stabilizing Ni catalysts in biogas reforming via in situ carbon deposit removal by CeO2 oxygen vacancies

Upcycling of hazardous plastic waste by CO 2 transformation-enhanced steam reforming over MgO-promoted Ni/C bifunctional catalyst

Catalytic gasification of wet municipal solid waste with HfO2 promoted Ni-CaO catalyst for H2-rich syngas production

CO2 Methanation on the Catalyst of Ni/MCM-41 Promoted with CeO2

Reducing Carbon Deposition and Enhancing Reaction Stability by Ceria for Methane Dry Reforming over Ni@SiO2@CeO2 Catalyst

Preparing a Zr-Doped CeO 2 Nanorod to Improve the Catalytic Performance of the Ni-Based Catalyst for Dry Reforming of Methane by Enhancing Oxygen Supply

Production of catalytic-upgraded pyrolysis products from oiltea camellia shell and polypropylene using NiCe-X/Al2O3 and ZrO2 catalyst (X = Fe, Co)

Exploring enhanced syngas production via the catalytic performance of metal‐doped X‐Ni/CeO2 (X = Zr, La, Sr) in the dry reforming of methane

Mesoporous Nanocrystalline Ceria–zirconia Solid Solutions Supported Nickel Based Catalysts for CO2 Reforming of CH4

Mesoporous Ce-Zr Solid Solutions Supported Ni-based Catalysts for Low-Temperature CO2 Methanation by Tuning the Reaction Intermediates

Investigating the influences of metal-support interaction in NiFe catalysts on the quality of carbon nanomaterials from waste polypropylene

Boosting CO2 methanation on ceria supported transition metal catalysts via chelation coupled wetness impregnation