Abstract:The gasification of municipal solid waste (MSW) in the presence of a Ni-CaO catalyst is a promising approach for in situ CO2 capture along with enhanced H-2 syngas production. However, the instability of the catalyst-sorbent matrix is a challenging obstacle for the gasification process. The direct current (dc) arc plasma melting method was employed to prepare a series of bifunctional catalysts (Ni-CaO) with varied Ni loadings, while TiO2 as polymorphic transition material was added to promote the stability of the catalyst. The catalyst samples were evaluated for cyclic CO2 capture and catalytic gasification of MSW using thermogravimetric analysis (TGA) and a fixed-bed reactor, respectively. The obtained results showed that the addition of TiO2 into Ni-CaO catalyst-sorbent led to improvements in the stability of catalyst for CO2 capture. The gasification performance of a bifunctional Ni-CaO-TiO2 catalyst was evaluated on the basis of Ni loading, the catalyst to MSW (C/M) ratio, temperature, and steam rate. The results indicated that, after the addition of a Ni-CaO-TiO2 catalyst (20% Ni loading), the dry gas yield (DGY) increased from 0.75 to 1.74 Nm(3)/kg and H-2 concentration increased from 35.1 to 57.7%. Meanwhile, the tar content decreased from 9.38 to 2.55% with the addition of the catalyst. The significant influences of Ni loading, C/M ratio, gasification temperature, and steam on product composition and characteristics were also evaluated. Tar analysis indicated that steam and catalyst addition resulted in tar reduction, which led to a higher DGY. Moreover, an unconventional method (i.e., thermal plasma technique) was employed for the catalyst preparation, which demonstrated promising results for MSW gasification with an industrial application prospect.

Hydrogen-rich syngas from wet municipal solid waste gasification using Ni/Waste marble powder catalyst promoted by transition metals

Enhanced H2 Production from Municipal Solid Waste Gasification Using Ni–CaO–TiO2 Bifunctional Catalyst Prepared by Dc Arc Plasma Melting

Catalytic gasification of wet municipal solid waste with HfO2 promoted Ni-CaO catalyst for H2-rich syngas production

In-situ catalytic decomposition of emitted ammonia from municipal solid waste gasification by Ni–M bimetallic catalysts supported on sewage sludge-derived biochar

Hydrogen-rich syngas production via catalytic gasification of sewage sludge and wheat straw using corn stalk char-supported catalysts

Sewage sludge steam gasification over bimetallic mesoporous Al-MCM48 catalysts for efficient hydrogen generation

Waste tire derived char supported Ni‐Fe catalyst for catalytic thermochemical conversion of wet municipal solid waste

Enhancing CO2 Gasification-Reforming of Municipal Solid Waste with Ni/CeO2 and Ni/ZrO2 Catalysts

Catalysis/sorption enhanced pyrolysis-gasification of biomass for H 2 -rich gas production: Effects of various nickel-based catalysts addition and the combination with calcined dolomite

Two-Stage Gasification of Sewage Sludge for Enhanced Hydrogen Production: Alkaline Pyrolysis Coupled with Catalytic Reforming Using Waste-Supported Ni Catalysts

Enhancing CO 2 gasification-reforming of municipal solid waste with Ni/CeO 2 and Ni/ZrO 2 catalysts

Hydrogen-rich Syngas Production by Catalytic Cracking of Tar in Wastewater under Supercritical Condition

Development of Nickel-Based Bimetallic Catalysts for Production of Hydrogen-Rich Syngas Via Supercritical Water Gasification of Liquid Residue from Hydrothermal Pretreatment of Food Waste

Waste-derived char-supported Ni catalyst for syngas methanation: Ni recovery, performance evolution and its implications for assessing char support

Catalytic gasification of food waste in supercritical water over La promoted Ni/Al2O3 catalysts for enhancing H2 production

Catalytic pyrolysis of waste cooking oil for hydrogen-rich syngas production over bimetallic Fe-Ru/ZSM-5 catalyst

Hydrogen production by biomass gasification in supercritical water with bimetallic Ni-M/γAl2O3 catalysts (M = Cu, Co and Sn)

Effects of Ni/Al2O3 catalyst treatment condition on thermocatalytic conversion of spent disposable wipes

Hydrogen-rich Syngas Produced from the Co-Pyrolysis of Municipal Solid Waste and Wheat Straw

Enhancement of H 2 production via catalytic steam gasification of food waste as feedstock and its ash as a support and promoter for Ni catalyst

Hydrogen-rich syngas production from biomass gasification using biochar-based nanocatalysts