Abstract:H2 production can be used as a clean and renewable energy source for various applications, including fuel cells, internal combustion engines, and chemical production. Using nickel-based catalysts for steam reforming biomass tar presents challenges related to catalyst deactivation, poisoning, heterogeneous composition, high process temperatures, and gas impurities. To overcome these challenges, adopting a nickel-based catalyst with selected oxide support and MgO and CaO promoter is a promising approach for improving the efficiency and sustainability of steam reforming for hydrogen production. The majority of studies conducted to date have focused on the steam reforming of particular tar compounds, most commonly benzene, phenol, toluene, or naphthalene, over a range of support catalysts. However, the actual biomass tar composition is complex, and each component impacts how well steam reforming works. In this research, a multi-compound biomass tar model including phenol, toluene, naphthalene, and pyrene underwent a steam reforming process. Various types with 10 wt.% of nickel-based catalysts were generated by the co-impregnation technique, which included 90 wt.% different oxide supports (Al2O3, La2O3, and ZrO2) and 10 wt.% of combination alkaline oxide earth promoters (MgO and CaO). Thermogravimetric analysis, Brunauer–Emmett–Teller (BET) method, N2 physisorption, temperature-programmed reduction (H2-TPR), temperature-programmed desorption (CO2-TPD), and X-ray diffraction (XRD) of ni-based catalyst characterized physiochemical properties of the prepared catalyst. The reaction temperature used for steam reforming was 800 °C, an S/C ratio of 1, and a GHSV of 13,500 h−1. Ni/La2O3/MgO/CaO (NiLaMgCa) produced the most carbon to-gas conversion (86.27 mol%) and H2 yield (51.58 mol%) after 5 h of reaction compared to other catalysts tested in this study. Additionally, the filamentous carbon coke deposited on the spent catalyst of NiLaMgCa does not impact the catalyst activity. NiLaMgCa was the best catalyst compared to other catalysts investigated, exhibiting a stable and high catalytic performance in the steam reforming of gasified biomass tar. In conclusion, this study presents a novel approach by adding a combination of MgO and CaO promoters to a ni-based catalyst with various oxide supports, strengthening the metal-support interaction and improving the acid-base balance of the catalyst surface. The mesoporous structure and active phase (metallic Ni) were successfully developed. This can lead to an increase in the conversion of tar to H2 yield gas and a decrease in the production of undesired byproducts, such as CH4 and CO.

Catalysis/sorption enhanced pyrolysis-gasification of biomass for H 2 -rich gas production: Effects of various nickel-based catalysts addition and the combination with calcined dolomite

Catalytic pyrolysis of biomass with Ni/Fe-CaO-based catalysts for hydrogen-rich gas: DFT and experimental study

Effective Catalytic of Rice Straw Pyrolysis over Ni/CaZnAl Catalyst for Producing Hydrogen-Rich Syngas

Investigation of Catalysts, CO2 Sorbents and Their Combinations for Maximising H2 Output During the Thermal Decomposition of Biomass

Enhanced H2 Production from Municipal Solid Waste Gasification Using Ni–CaO–TiO2 Bifunctional Catalyst Prepared by Dc Arc Plasma Melting

Catalytic pyrolysis of corncob with Ni/CaO dual functional catalysts for hydrogen-rich gas

Hydrogen-rich syngas production via catalytic gasification of sewage sludge and wheat straw using corn stalk char-supported catalysts

Alkali metal bifunctional catalyst-sorbents enabled biomass pyrolysis for enhanced hydrogen production

Experimental study on catalytic pyrolysis of oily sludge for H2 production under new nickel-ore-based catalysts

Investigating the effect of nano-nickel-based catalyst Ni-Me/HZSM-5 on in situ catalytic pyrolysis of distillers dried grains with solubles

Synergistic Catalytic Biomass-H2o Gasification for H2 Production and Biochar Etching Mechanism: Experimental and DFT Studies

Study of Fe‐Ni‐Mg catalytic activities for hydrogen‐rich gas production from biomass pyrolysis

Hydrogen-rich syngas from wet municipal solid waste gasification using Ni/Waste marble powder catalyst promoted by transition metals

Nickel nanocatalysts prepared via continuous supercritical hydrothermal synthesis for supercritical water gasification

Hydrogen-rich Gas Production by Catalytic Steam Gasification of Rice Husk Using CeO2-modified Ni-CaO Sorption Bifunctional Catalysts

Methane Dry Reforming by Ni–Cu Nanoalloys Anchored on Periclase-Phase MgAlO x Nanosheets for Enhanced Syngas Production

Hydrogen-rich syngas production via sorption-enhanced steam gasification of biomass using Fe x Ni y CaO bi-functional materials

Hydrogen-Rich Gas Production from Two-Stage Catalytic Pyrolysis of Pine Sawdust with Nano-NiO/Al2O3 Catalyst

Enhanced hydrogen production from biomass gasification by in-situ CO 2 capture with Ni/Ca-based catalysts

Syngas production by catalytic pyrolysis of rice straw over modified Ni-based catalyst

The Efficiency of Carbon Conversion and Hydrogen Production from Tar Steam Reforming of Biomass Using Ni-Based Catalysts with Alkaline Earth Promoters