Abstract:The effect of silicon on diffusion behavior of the carbide forming elements in Ni-Mo-Cr-Fe based corrosion-resistant alloy is studied by diffusion couple experiment. One group of diffusion couples are made of the alloy with a different silicon content, another group of diffusion couples are made of pure nickel and the alloy with different silicon content (0Si, 2Si). Two groups of alloys with same silicon content and different carbon content are also prepared, the microstructure of solution and aging state of these two groups alloys are analyzed, and their stress rupture properties are tested. The effect of silicon on the diffusion of alloy elements and the interaction effect of carbon and silicon on the microstructure and stress rupture properties of the alloy are analyzed. The mechanism of Si on the precipitation behavior of carbide phase in Ni-Mo-Cr-Fe corrosion resistant alloy is discussed. The results show that silicon can promote the diffusion of carbide forming elements and the formation of carbide. The precipitation behavior of the secondary phase is the result of the interaction effect of silicon and carbon, and is related to the thermal history of the alloy. Combined with the characteristic of primary carbides, it is confirmed that the precipitation of M12C type secondary carbide is caused by the relative lack of carbon element and the relative enrichment of carbide forming elements such as molybdenum. The stress rupture properties of two silicon-containing alloys with different carbon contents in solution and aging state are tested. The stress rupture life of low carbon alloy is lower compared with high carbon alloy at solution state, but after aging treatment, the stress rupture life of low carbon alloy is significantly improved, and higher than that of high carbon alloy. The main aim of this research is to reveal the influence mechanism of silicon on carbide phase precipitation of a Ni-Mo-Cr-Fe based corrosion-resistant superalloy, which provides theoretical basis and reference for later alloy design and engineering application.

The inhibition of the interaction between CVD SiC and GH3535 alloy in molten LiF-NaF-KF salt by the Li metal

Effect of metallic ion products on the corrosion of GH3535 alloy in a eutectic (Li, Na, K) F melt

High temperature in-situ synchrotron-based XRD study on the crystal structure evolution of C/C composite impregnated by FLiNaK molten salt

Effect of Te on the corrosion behavior of GH3535 alloy in molten LiF-NaF-KF salt

Effect of Mg on Nucleation Process of Recrystallization in Al–Mg–Si/SiCp Composite

Corrosion Behavior and Elements Interdiffusion Between a Ni Coating and GH3535 Alloy with and Without a CrN Barrier in Molten Fluoride Salts

The corrosion behavior of CVD SiC coatings on SiCf/SiC composites in a simulated molten salt reactors environment

Corrosion Behavior of the GH3535 and C276 Alloys at the Liquid/Gas LiCl–KCl Salt Interface at 550 °C

Influence of SiC content in B4C–nSiC composites corrosion in molten FLiNaK salt at 800°C

Effect of irradiation damage defects on the impurity containing molten salt corrosion behavior in GH3535 alloy

The corrosion resistance mechanisms of the cr-coated SiC in molten Na2SO4 salt: Strengthened boundaries and protective scales

Corrosion behaviour of AlN ceramics in LiF-LiCl-LiBr-Li molten salt at 500 °C

Influence Mechanism of Silicon on Carbide Phase Precipitation of a Corrosion Resistance Nickel Based Superalloy

Formation of nano-sized M2C carbides in Si-free GH3535 alloy

Effect of Si on δ‐ferrite/γ‐austenite transformation and M23C6 precipitation during solidification of X10CrAlSi18 ferritic heat‐resistant stainless steel

Interfacial reaction mechanism and high temperature stability of heat-resistant steel and SiC under a vacuum environment

Metallic impurities induced corrosion of a Ni-26W-6Cr alloy in molten fluoride salts at 850 oC

Corrosion behavior of UNS N10003 alloy in molten LiF-BeF2-ZrF4 with phosphide impurity

Investigations of the effect of Si addition on graphite elimination and the oxidation behavior of SiC joint using Inconel 625 powder filler

Accelerated formation of M 2 C carbides by proton irradiation inhibits molten salt corrosion in Ni-based alloy

Effect of Σ5(2 1 0)[0 0 1] symmetric tilt grain boundary on the compatibility between iron and liquid lithium: Atomistic simulations