Abstract:Ceramic-coated graphite powders are considered as effective raw materials to fabricate three-dimensional continuous ceramic skeleton-reinforced graphite matrix composites which can overcome their inherent poor densification and improve their mechanical and antioxidation properties. However, the morphology and thickness regulation of ceramic coatings on graphite particles are still a great challenge. Herein, SiC-coated graphite (graphite@SiC) powders were prepared by nitriding combustion synthesis using Si and graphited mesocarbon microbead (MCMB) as raw powders with polytetrafluoroethylene (PTFE) as a promoter. The effects of the PTFE content and the Si/MCMB molar ratio on the phase composition and coating morphology were investigated. The phase transition and microstructure evolution of a combustion synthesis (CS) process were revealed by a gas-released quenching experiment. When the Si/MCMB molar ratio was 1 : 3 and the PTFE content was 10 wt%, the thickness of the SiC coating synthesized under 2 MPa N2 reached 1.14 μm. The corresponding sintered graphite@SiC composite had relative density of 99.2% and flexural strength of 231 MPa, accompanied by a significant improvement in high-temperature antioxidation properties. The as-synthesized graphite@SiC powders with good sinterability and antioxidation properties show great promise for applications in the nuclear industry and other extreme fields.

Investigations of the effect of Si addition on graphite elimination and the oxidation behavior of SiC joint using Inconel 625 powder filler

Effect of Zr addition on the interfacial reaction of the SiC joint brazed by Inconel 625 powder filler

Effect of Mo addition on interfacial microstructure and mechanical property of SiC joint brazed by an Ni–Si filler

Microstructural evolution and mechanical property of a SiCf/SiC composite/Ni-based superalloy joint brazed with an Au-Cu-Ti filler

Reactions Mechanism and Mechanical Properties of a SiCf/SiC Joint Affected by Cu/Ni/Ti Elements and Inhomogeneous Composites

Improved the Mechanical Properties of SiCf/SiC-GH536 Joints by In-Situ Introducing Better Toughness MoNiSi Phase to the Brazing Seam

Interfacial Si–O coordination for inhibiting the graphite phase enables superior SiC/Nb heterostructure joining by AuNi

Reaction Mechanisms and Mechanical Properties of SiCf/SiC Composite and GH536 Superalloy Joints Using CoFeNiCrMn High-Entropy Alloy Filler

A Study of the SiCf/SiC Composite/ni-Based Superalloy Dissimilar Joint Brazed with a Composite Filler

Effect of Ti content on microstructure and mechanical properties of SiCf/SiC composites/GH536 superalloy joints brazed with CoFeCrNiCuTi high entropy filler

Improving the Brazing of SiC Ceramic by Nano-Si3n4 Reinforced BNi-2 Composite Filler Prepared by High-Shear Processing

Brazing of SiC ceramic to Al<sub>0.3</sub>CoCrFeNi high entropy alloy by graphene nanoplates reinforced AgCuTi composite fillers

Preparation of SiC Coated Graphite Composite Powders by Nitriding Combustion Synthesis

Microstructure and Mechanical Properties of the SiC/Nb Joint Brazed Using AgCuTi + B4C Composite Filler Metal

Microstructural and mechanical properties of porous Si3N4 carbon coated ceramic brazed with a cobalt-silicon filler

Improvement of Strength and Oxidation Resistance for SiC/graphite Composites by SiC Coating

Interfacial reaction mechanism of SiC joints joined by pure nickel foil

Investigating the Effect of WC Reinforcements in Cu Ti Composite Filler on the Microstructural Evolution and Mechanical Characteristics in Brazing Cf/SiC and GH3536

Investigating the effect of WC reinforcements in Cu Ti composite filler on the microstructural evolution and mechanical characteristics in brazing C f /SiC and GH3536

Microstructure and shear strength of SiC/Zr joint brazed with LiAlSiO4/graphene-coated Cu-foam composite interlayer

Effect of Holding Time on Microstructure and Mechanical Properties of SiC/SiC Joints Brazed by Ag-Cu-Ti + B4C Composite Filler