Abstract:Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Ahead of Print. After pneumatic shot peening, compressive residual stress is induced on the surface of the target, which will improve the fatigue life. During the process, surface roughness is also induced, which may reduce the fatigue life. To achieve the optimum compressive residual stress with the smallest surface roughness, the formation mechanism of the residual stress field and the surface topography are revealed. Then, pneumatic shot peening is simulated by using a discrete element method–finite element method coupled model. Based on the effects of four variables (the incident angle θ, the initial shot velocity v0, the shot radius R) and the mass flow rate rm on five parameters (the equivalent plastic strain, the equivalent stress, the surface compressive residual stress, the maximum compressive residual stress), the surface roughness is investigated. The results show that it induces a residual elastic–plastic strain after the impact of a single shot, which can form a crater and a hemispherical residual stress field. After the impact of many random shots, scattered craters connect with each other, therewith a rough and continuous surface topography is formed. Scattered residual stress fields couple with each other, and a constant residual stress layer with the compressive residual stress in the surface and the tensile residual stress in the subsurface are formed. All five parameters are determined by the residual elastic–plastic strain, which increases as the augment of the normal impact velocity, the shot mass, and the coverage rate. Along with the increase of θ and rm, these five parameters firstly increase and then decrease; with the increase of v0 and R, these five parameters increase. Therefore, reasonable values of θ, v0, R, and rm should be chosen to obtain the optimum compressive residual stress with as small surface roughness as possible.

Measurement and Identified Prediction Equation for Residual Stress Distribution in Aluminum Alloy A5052 under Various Pneumatic Shot Peening Conditions

Studies on residual stress and surface topography after pneumatic shot peening using discrete element method–finite element method coupled model

Evaluation of Residual Stress Depth Profiling in 7075 Aluminum Alloy Plates

Investigation of residual stress, stress relaxation and work hardening effects induced by shot peening on the fatigue life of AA 6005-T6 aluminum alloy

An analytical model for predicting residual stress in shot peening with strain energy method

Simulation and Experimental Investigation of Multi-Step Shot Peening for Surface Crack Repair in Aluminum Alloys

Numerical Simulation of Residual Stress Field Induced by Ultrasonic Shot Peening

Prediction of residual stress relaxations in shot-peened specimens and its application for the rotor disc assessment

Enhancing plain fatigue strength in aluminum alloys through shot peening: Experimental investigations and a strain energy density interpretation

An experimental study of residual stress induced by ultrasonic shot peening

Investigation on experiments and numerical modeling of the residual stress distribution in deformed surface layer of Al6061 alloy after ultrasonic peening treatment

Study on Residual Stresses of 2219 Aluminum Alloy with TIG Welding and Its Reduction by Shot Peening

Surface characteristics and stress corrosion behavior of AA 7075-T6 aluminum alloys after different shot peening processes

Initial Residual Stress Measurement Based on Piecewise Calculation Methods for Predicting Machining Deformation of Aeronautical Monolithic Components

Effect of Shot Peening on Redistribution of Residual Stress Field in Friction Stir Welding of 2219 Aluminum Alloy

Investigation of the effects of shot overlap and rigid body assumptions on surface layer characteristics in shot peening simulation

Prediction of fatigue crack propagation behavior of AA2524 after laser shot peening

Unraveling Residual Stress Distribution Characteristics of 6061-T6 Aluminum Alloy Induced by Laser Shock Peening

The numerical simulation of shot peening process with an equivalent static loading method

Nondestructive Evaluation of Residual Stress in Shot Peened Inconel Using Ultrasonic Minimum Reflection Measurement

Shot-Peening-Induced Residual Stresses In Powder Coatings Produced By Spraying