Abstract:Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Ahead of Print. After pneumatic shot peening, compressive residual stress is induced on the surface of the target, which will improve the fatigue life. During the process, surface roughness is also induced, which may reduce the fatigue life. To achieve the optimum compressive residual stress with the smallest surface roughness, the formation mechanism of the residual stress field and the surface topography are revealed. Then, pneumatic shot peening is simulated by using a discrete element method–finite element method coupled model. Based on the effects of four variables (the incident angle θ, the initial shot velocity v0, the shot radius R) and the mass flow rate rm on five parameters (the equivalent plastic strain, the equivalent stress, the surface compressive residual stress, the maximum compressive residual stress), the surface roughness is investigated. The results show that it induces a residual elastic–plastic strain after the impact of a single shot, which can form a crater and a hemispherical residual stress field. After the impact of many random shots, scattered craters connect with each other, therewith a rough and continuous surface topography is formed. Scattered residual stress fields couple with each other, and a constant residual stress layer with the compressive residual stress in the surface and the tensile residual stress in the subsurface are formed. All five parameters are determined by the residual elastic–plastic strain, which increases as the augment of the normal impact velocity, the shot mass, and the coverage rate. Along with the increase of θ and rm, these five parameters firstly increase and then decrease; with the increase of v0 and R, these five parameters increase. Therefore, reasonable values of θ, v0, R, and rm should be chosen to obtain the optimum compressive residual stress with as small surface roughness as possible.

Investigation of the effects of shot overlap and rigid body assumptions on surface layer characteristics in shot peening simulation

A simulation modeling methodology considering random multiple shots for shot peening process

FE analysis of shot-peening-induced residual stresses of AISI 304 stainless steel by considering mesh density and friction coefficient

Studies on residual stress and surface topography after pneumatic shot peening using discrete element method–finite element method coupled model

An evaluation on SP surface property by means of combined FEM-DEM shot dynamics simulation

Revealing the relationship between the shot type and fatigue performance of laser powder bed fused 304L steel following shot peening

Numerical Simulation of Residual Stress Field Induced by Ultrasonic Shot Peening

An experimental study of residual stress induced by ultrasonic shot peening

An analytical model for predicting residual stress in shot peening with strain energy method

Numerical simulation on influencing factors of micropartical shot peening

Shot peening coverage effect on laser powder bed fused steel

A new analytical model to predict residual stress induced by ultrasonic shot peening

Experimental Study on the Effect of Shot Peening and Re-Shot Peening on the Residual Stress Distribution and Fatigue Life of 20CrMnTi

Prediction of fatigue crack growth and residual stress relaxations in shot-peened material

Investigation on the deformation progress and residual stress of Ti-6Al-4V alloy during laser shock peening

Numerical modeling of ultrasonic shot peening with an accurate impact velocity

A study of the effect of dual shot peening on the surface integrity of carburized steel: combined experiments with dislocation density-based simulations

Shot Stream Finite Element Model for Shot Peening Numerical Simulation and Its Experiment Study

Fatigue life prediction model for shot-peened laser powder bed fused 304L steel considering residual stress relaxation and defect distribution

The influence of shot peening on mechanical properties, wear, and corrosion resistance of 42CrMo steel

Effect of Shot Peening on Residual Stress Distribution and Microstructure Evolution of Artificially Defected 50CrV4 Steel