Abstract:The hydrogen evolution reaction (HER) is one of the most promising methods of obtaining high-purity hydrogen. However, the high cost and limited resources of materials with low cathodic hydrogen evolution overvoltage values, such as platinum group metals, are the main obstacles to the use HER for obtaining hydrogen on an industrial scale. Therefore, it is necessary to develop new alternative materials and methods of their production. One of the promising materials are catalysts based on refractory metals, in particular tungsten carbides. Metal tungsten can also be used for these purposes. In our opinion, high-temperature electrochemical synthesis (HTES) in molten salts can be a promising method of obtaining materials with properties that meet the requirements for effective catalysts, namely: ultra-dispersity, high specific surface area, mesoporosity and defective structure, high chemical and electrochemical stability. Therefore, the purpose of this work is to evaluate the electrocatalytic activity of a group of materials for HER, which are obtained by HTES in melts. Four samples of electrolytic materials were chosen for the study: tungsten, carbon, tungsten mono- and semi-carbides (WC and W2С). All samples were characterized in detail using X-ray diffraction (phase composition), SEM (morphology), Raman spectroscopy (structure of carbon phases), DTG (free carbon content). Based on the analysis of the obtained data, it was established that all samples can be used as catalysts: crystallites have a nanometer size and a large number of structural defects; morphology provides increased surface area; tungsten carbide particles are covered with a layer of free carbon, which prevents oxidation of carbide to WO3, which has a lower catalytic activity; carbon particles are nanosized (20–30 nm) and contain a large number of structural defects; tungsten carbide-based samples contain free carbon, which increases the specific surface area, but does not cause clogging of pores. Polarization measurements were carried out at room temperature at a polarization rate of 5 mV/s in a standard three-electrode cell with an Ag|AgCl reference electrode. 1N H2SO4 was used as a base solution, which was bubbled with high-purity argon. Onset potentials for all samples are -0.05 – -0.25 V (in order WC/C – W2C/WC/C – C – W). The overvoltage and Tafel slope were calculated and WC/C composite was shown to have the lowest values of -0.2 V and -75 mV, respectively. Electrolytic composite of tungsten carbide/carbon have demonstrated the best characteristics, so we plan to continue the development of synthesis method of carbide compounds, which will allow us to reveal even greater potential of carbide catalysts and pave the way for their wide application in catalytic processes.

Study of the Possibility of Using an Alternating Current Plasma Torch to Obtain Ultrafine Tungsten Carbide

Thermodynamic Estimation of Tungsten Carbide Production by the High Voltage AC Plasma Torch

Tungsten Material Behavior under H2, D2, and He Plasma Interaction Conditions in the Framework of Fusion-Relevant Studies

Plasma way to obtain ultrafine iron and aluminum oxides

A Novel Approach to the Rapid in Situ Synthesis of Tungsten Carbide Nanopowder by Plasma Milling and Carbothermal Reduction

Nanostructure Evolution and Surface Modification of Tungsten Exposed to Low Energy, High Flux Deuterium Plasma

Ultrafine and Nanoscaled Tungsten Carbide Synthesis from Colloidal Carbon Coated Nano Tungsten Precursor

Production Silicon Carbide Based on Micro and Nano-Sized Silicon Dioxide in Conditions of Thermal Plasma Energy

An investigation of the peculiarities of high-speed sintering of plasma chemically synthesized tungsten carbide nanopowders with increased oxygen content

Application of the Method of Evaporation of a Substance by High-Energy Electron Beam to Produce Tungsten Nanopowder

Recent Studies of Tungsten-Based Plasma-Facing Materials in the Linear Plasma Device STEP

Preparation Technology of Ultra-Fine Tungsten Carbide Powders: an Overview

On the fabrication of ultrafine-grained potassium-doped tungsten: Mechanical milling and spark plasma sintering of K-doped W powder prepared by evaporation-condensation method

Development of Tungsten As Plasma-Facing Materials by Doping Tantalum Carbide Nanoparticles

Hydrogen arc plasma promotes the purification and nanoparticle preparation of tungsten

ELECTROLYTIC CATALYSTS BASED ON TUNGSTEN AND CARBON COMPOUNDS FOR THE HYDROGEN EVOLUTION REACTION

RESEARCH OF THE STRUCTURAL-PHASE STATE OF TUNGSTEN SURFACE LAYER CROSS-SECTION AFTER CARBIDIZATION IN A BEAM-PLASMA DISCHARGE USAGE ELECTRON MICROSCOPY METHODS

Plasma-target surface interaction during non-equilibrium plasma irradiation at atmospheric pressure: Generation of dusty plasma

Synthesis of Nanostructured Tungsten Carbide (WC) from Ammonia Paratungstate-APT and its Characterization by XRD and Rietveld Refinement

Synthesis of Ultrafine Silicon Carbide Nanoparticles Using Nonthermal Arc Plasma at Atmospheric Pressure

Microstructural Effects of Y2O3 and TiC Additions in Tungsten