Abstract:It is always a great challenge to manufacture defect-free and high-performance pure tungsten by laser additive manufacturing until now. In this work, using nanopowder as precursors, the pure tungsten green parts were successfully manufactured by indirect additive manufacturing technology, powder extrusion printing. The subsequent debinding-sintering process of the green parts has been optimized to obtain high-relative-density, fine-grain and defect-free tungsten samples. The relative density of the sample increased with the increase of sintering temperature. The microstructures of pure tungsten prepared by direct and indirect additive manufacturing techniques were studied comparatively, including laser powder bed fusion and powder extrusion printing. The formation of microcracks in pure tungsten samples is mainly due to the high residual stress provided by laser powder bed fusion and the high ductile-to-brittle transition temperature characteristics of tungsten. The sintering temperature of the pure tungsten samples with the highest compressive strength (1290 ± 10 MPa) was determined to be 2000 °C. Compared with other sintered samples, defect-free samples sintered at 2000 °C had finer grains (9.8 μm) while maintaining high relative density (99.1 ± 0.4%). The higher strength of the sintered samples at 2000 °C is related to the fine-grain strengthening and high relative density compared to samples obtained from other direct additive manufacturing technologies and sintered at other temperatures. The indirect additive manufacturing technique based on the use of nanopowder precursors developed in this work provides a new technical approach for the additive manufacturing of high-performance tungsten and/or other refractory metals.

On the fabrication of ultrafine-grained potassium-doped tungsten: Mechanical milling and spark plasma sintering of K-doped W powder prepared by evaporation-condensation method

High-pressure Preparation of Bulk Tungsten Material with Near-Full Densification and High Fracture Toughness

Design of Highly Thermal-Shock Resistant Tungsten Alloys with Nanoscaled Intra- and Inter-Type K Bubbles

Recent Studies of Tungsten-Based Plasma-Facing Materials in the Linear Plasma Device STEP

Microstructural Effects of Y2O3 and TiC Additions in Tungsten

Ultrafine Grain Tungsten Heavy Alloys with Excellent Performance Prepared by Spark Plasma Sintering

Chemical Synthesis and Oxide Dispersion Properties of Strengthened Tungsten Via Spark Plasma Sintering

Ultrafine-Grained Tungsten Heavy Alloy Prepared by High-Pressure Spark Plasma Sintering

Mechanical Properties of a Novel Tungsten Fiber-Reinforced Tungsten Composite Prepared Through Powder Extrusion Printing and High-Pressure High-Temperature Sintering

Fabrication of spherical W–ZrC powder for additive manufacturing by spray granulation combined with plasma spheroidization

Achieving high-performance pure tungsten by additive manufacturing: Processing, microstructural evolution and mechanical properties

Research and development of nanocrystalline W/W-based materials: novel preparation approaches, formation mechanisms, and unprecedented excellent properties

Suppressing Pore-Boundary Separation During Spark Plasma Sintering of Tungsten

Excellent performance of W–Y2O3 composite via powder process improvement and Y2O3 refinement

Effect of potassium bubbles on the thermal shock fatigue behaviors of large-volume potassium-doped tungsten alloy

Preparation Technology of Ultra-Fine Tungsten Carbide Powders: an Overview

Simulation and Experimental Investigation on Additive Manufacturing of Highly Dense Pure Tungsten by Laser Powder Bed Fusion

Large-scale potassium-doped tungsten alloy with superior recrystallization resistance, ductility and strength induced by potassium bubbles

Combining Chemical Vapor Deposition and Spark Plasma Sintering for the Production of Tungsten Fiber‐Reinforced Tungsten (Hybrid – Wf/W)

Ultra-fine Grained/Nano-crystalline Tungsten-Plasma Facing Material for Future Fusion Reactors

A review of tungsten fabricated via laser powder bed fusion