Abstract:The study addresses the issue of the absence of high-quality WC-Co composite powder for laser powder bed fusion and assessing the printability of the new powder in terms of densification, microstructure and mechanical properties. The fluidized bed chemical vapor deposition (FBCVD) combined with electroless plating process was adopted to make core-shell structured WC-Co composite powder. The excellent uniformity of Co and good powder flowability were achieved by tuning the size and distribution of Co catalyst during FBCVD and regulating their relationship to the subsequent electroless plating behavior. The newly developed composite powder exhibited excellent printability. The densification mechanism was largely dependent on the laser energy density. The liquid formed by the melting of Co was responsible for the densification at low laser energy density, while the Co-W-C ternary liquid resulted from the dissolution of WC into Co melt dominated the densification at high laser energy density. Microstructurally, the morphology and size of WC grains were insignificantly changed because of its non-participation with liquid formation at low laser energy density. The rectangular/triangular WC grain morphology similar to the traditional sintered was formed at high laser energy density because of the precipitation of WC from the Co-W-C ternary liquid. Affected by the different liquid formation processes, increasing laser energy density increased the relative density, promoted the W2C phase formation and decreased WC grain size, which remarkably improved the hardness and tribological properties of the printed cemented carbide.

Combining Chemical Vapor Deposition and Spark Plasma Sintering for the Production of Tungsten Fiber‐Reinforced Tungsten (Hybrid – Wf/W)

Combining CVD and SPS for the production of Tungsten fiber‐reinforced tungsten (Hybrid ‐ Wf /W)

Tungsten Joining with Copper Alloy and Its High Heat Load Performance

Preparation of Tungsten Fiber Reinforced-Tungsten/copper Composite for Plasma Facing Component

Evolution of Tungsten Fibre Reinforced Tungsten ‐ Remarks on Production and Joining

Microstructural Effects of Y2O3 and TiC Additions in Tungsten

Excellent performance of W–Y2O3 composite via powder process improvement and Y2O3 refinement

Discovering tungsten-based composites as plasma facing materials for future high-duty cycle nuclear fusion reactors

Rapid synthesis of ultrafine WC-Co cemented carbides by in-situ reactions and spark plasma sintering

Spark Plasma Sintering of Fine-Grained WC-Co Composites

Microstructure and mechanical properties of Wf/W composites influenced by Y2O3 coating

Effect of W-coated Diamond on the Microstructure and Thermal Conductivity of Diamond/w Matrix Composites for Plasma-Facing Materials (Pfms)

Suppressing Pore-Boundary Separation During Spark Plasma Sintering of Tungsten

The Effect of Y2O3 Particles on the Microstructure and Mechanical Properties of Tungsten Fiber-Reinforced Tungsten Composites

Laser powder bed fusion of cemented carbides by developing a new type of Co coated WC composite powder

Spark Plasma Sintering Of Nanocrystalline Wc/Co Cemented Carbides

Large-Size and Ultrahigh Purity Tungsten with Enhanced Physical Properties via Chemical Vapor Deposition

Mechanical Properties of a Novel Tungsten Fiber-Reinforced Tungsten Composite Prepared Through Powder Extrusion Printing and High-Pressure High-Temperature Sintering

On the fabrication of ultrafine-grained potassium-doped tungsten: Mechanical milling and spark plasma sintering of K-doped W powder prepared by evaporation-condensation method

An investigation of the peculiarities of high-speed sintering of plasma chemically synthesized tungsten carbide nanopowders with increased oxygen content

Spark Plasma Sintering of Ultrafine WC-5%Co Cemented Carbide Composite Powders