Abstract:Plasma-facing materials and components in a fusion reactor are the interface between the plasma and the material part. The operational conditions in this environment are probably the most challenging parameters for any material: high power loads and large particle and neutron fluxes are simultaneously impinging at their surfaces. To realize fusion in a tokamak or stellarator reactor, given the proven geometries and technological solutions, requires an improvement of the thermo-mechanical capabilities of currently available materials. In its first part this article describes the requirements and needs for new, advanced materials for the plasma-facing components. Starting points are capabilities and limitations of tungsten-based alloys and structurally stabilized materials. Furthermore, material requirements from the fusion-specific loading scenarios of a divertor in a water-cooled configuration are described, defining directions for the material development. Finally, safety requirements for a fusion reactor with its specific accident scenarios and their potential environmental impact lead to the definition of inherently passive materials, avoiding release of radioactive material through intrinsic material properties. The second part of this article demonstrates current material development lines answering the fusion-specific requirements for high heat flux materials. New composite materials, in particular fiber-reinforced and laminated structures, as well as mechanically alloyed tungsten materials, allow the extension of the thermo-mechanical operation space towards regions of extreme steady-state and transient loads. Self-passivating tungsten alloys, demonstrating favorable tungsten-like plasma-wall interaction behavior under normal operation conditions, are an intrinsic solution to otherwise catastrophic consequences of loss-of-coolant and air ingress events in a fusion reactor. Permeation barrier layers avoid the escape of tritium into structural and cooling materials, thereby minimizing the release of tritium under normal operation conditions. Finally, solutions for the unique bonding requirements of dissimilar material used in a fusion reactor are demonstrated by describing the current status and prospects of functionally graded materials.

Evolution of Tungsten Fibre Reinforced Tungsten ‐ Remarks on Production and Joining

Tungsten Joining with Copper Alloy and Its High Heat Load Performance

Progress in the development of industrial scale tungsten fibre-reinforced composite materials

Progress of High Heat Flux Component Manufacture and Heat Load Experiments in China

Vacuum Hot-Pressed Beryllium and Tic Dispersion Strengthened Tungsten Alloy Developments for Iter and Future Fusion Reactors

Combining CVD and SPS for the production of Tungsten fiber‐reinforced tungsten (Hybrid ‐ Wf /W)

Study on the Microstructure and Properties Evolution of CuCrZr/316LN-IG Explosion Bonding for ITER First Wall Components

Recent progress in research on tungsten materials for nuclear fusion applications in Europe

Demonstrating tungsten fiber-reinforced porous-matrix tungsten composites for future fusion application

Bonding Tungsten, W–Cu-alloy and Copper with Amorphous Fe–W Alloy Transition

Mechanical Properties of a Novel Tungsten Fiber-Reinforced Tungsten Composite Prepared Through Powder Extrusion Printing and High-Pressure High-Temperature Sintering

Development of advanced high heat flux and plasma-facing materials

Preparation of Tungsten Fiber Reinforced-Tungsten/copper Composite for Plasma Facing Component

Combining Chemical Vapor Deposition and Spark Plasma Sintering for the Production of Tungsten Fiber‐Reinforced Tungsten (Hybrid – Wf/W)

Discovering tungsten-based composites as plasma facing materials for future high-duty cycle nuclear fusion reactors

Galvanic process for Cu-infiltration of W fibre-reinforced heat sinks

Microstructure and mechanical properties of Wf/W composites influenced by Y2O3 coating

Research and development of nanocrystalline W/W-based materials: novel preparation approaches, formation mechanisms, and unprecedented excellent properties

The Effect of Y2O3 Particles on the Microstructure and Mechanical Properties of Tungsten Fiber-Reinforced Tungsten Composites

Development of irradiation tolerant tungsten alloys for high temperature nuclear applications

Advances in Laser Powder Bed Fusion of Tungsten, Tungsten Alloys, and Tungsten-Based Composites