Abstract:Binderless WC-based cemented carbides with different fractions (0-9 wt.%) of ZrC nanopowder were fabricated through spark plasma sintering at 1600 °C under a uniaxial pressure of 50 MPa. The addition effect of ZrC nanopowder on the phase composition and microstructure of the fabricated materials were explored with the help of X-ray diffraction and scanning electron microscope. The results indicated that W2C phase was detected in the samples with 0-3 wt.% ZrC nanopowder, but with further increase in ZrC added fraction, ZrO2 phase instead of W2C phase was detected. The apparent density decreased gradually with the increase in added fraction of ZrC nanopowder, while the relative density increased initially and then decreased, reaching its maximum of about 98.2% when the added fraction of ZrC nanopowder was about 3 wt.%, indicating that appropriate added fraction of ZrC nanopowder can improve the densification of binderless WC cemented carbides. Without ZrC nanopowder, the coarsening and abnormal growth of WC grains were serious, resulting in many large prismatic WC grains in the samples. However, Such phenomena could be suppressed by adding ZrC nanopowder, resulting in much finer and more homogenous microstructure after 1-3 wt.% ZrC nanopowder was added. When the added fraction of ZrC nanopowder was higher than 3 wt.%, the agglomeration of ZrC nanopowder became more and more serious.

Fabrication of spherical W–ZrC powder for additive manufacturing by spray granulation combined with plasma spheroidization

Fabrication of spherical WC-Co powders by radio frequency inductively coupled plasma and a consequent heat treatment

In situ synthesis of spherical W Mo alloy powder for additive manufacturing by spray granulation combined with thermal plasma spheroidization

Dense Submicron-Sized ZrC – W Composite Produced by Reactive Melt in Fi Ltration at 1200 ° C

Fabrication and Stability of Ultrafine ZrC Nanoparticles Dispersion Strengthened Sub-Micrometer Grained W Alloy

Study on the RF Inductively Coupled Plasma Spheroidization of Refractory W and W-Ta Alloy Powders

Effect of ZrC nano-powder addition on the microstructure and mechanical properties of binderless tungsten carbide fabricated by spark plasma sintering

Fabrication and Characterization of Novel Powder Reconstitution Derived Nanostructured Spherical La2(Zr0.75Ce0.25)2O7 Feedstock for Plasma Spraying

Preparation of ZrO2 microspheres by spray granulation

Fabrication of nanocrystalline and ultra-hard tungsten alloy by dual particles dispersion strengthening

Crack Suppression in Additively Manufactured Tungsten by Introducing Secondary-Phase Nanoparticles into the Matrix

Preparation of spherical zirconia powder by nano-reactor of microemulsion and its densification behavior

Study on Fabrication of Spherical Tungsten Powder by Spray-Drying and Reduction Process

Preparation of spherical zirconia powder in microemulsion system and its densification behavior

On the fabrication of ultrafine-grained potassium-doped tungsten: Mechanical milling and spark plasma sintering of K-doped W powder prepared by evaporation-condensation method

Microstructure and Mechanical Properties of In-Situ Formed ZrC Nanoparticles Dispersion-Strengthened Tungsten Alloy

Microstructure and Mechanical Properties of Nano-Size Zirconium Carbide Dispersion Strengthened Tungsten Alloys Fabricated by Spark Plasma Sintering Method

Fabrication of ZrB2-SiC powder with a eutectic phase for sintering or plasma spraying

Phase Composition and Microstructure of Binderless Wc-Zrc Cemented Carbides Fabricated by Spark Plasma Sintering

Effect of processing parameters on microstructure and properties of spherical WC-Co powder by plasma spheroidization

Dense Pure Tungsten Fabricated by Selective Laser Melting