Abstract:In this work, based on the sol-gel method combined with spray granulation technology, a novel process method to prepare Yttria stabilized ZrO2 beads with 5–50 µm diameter, 123 nm grains size, few pores, solid internal structure and well spherical type is proposed. These advantages can greatly improve the beads density, and decline the sintering temperature. The optimum preparation parameters, including sol and spray parameters, baking and sintering conditions, are obtained through the investigation of experimental conditions. The SEM test results of the surface and cross section morphologies show that the beads have solid structure and there is good consistency between the surface and interior of the beads. The average grain size of test results is about 123 nm. The XRD test results demonstrate that no monoclinic phase exists in the beads. The sintering temperature of the new process is only 1200 °C. In this work, based on the sol-gel method combined with spray granulation technology, a novel process method to prepare Yttria stabilized ZrO2 beads with 5–50 µm diameter, 123 nm grains size, few pores, solid internal structure and well spherical type is proposed. These advantages can greatly improve the beads density, and decline the sintering temperature. The processes of the method mainly contain: sol preparation, spray forming process, organic compound discharging and sintering. The optimum preparation parameters, including sol and spray parameters, baking and sintering conditions, are obtained through the investigation of experimental conditions. The tested density result of the prepared beads is about 6.024 g/cm3 which is higher than for the traditional process. The SEM test results show that the diameter of the prepared Yttria stabilized ZrO2 beads is range from 5 to 50 µm with good sphericity. The surface and cross section morphologies show that the beads have solid structure and there is good consistency between the surface and interior of the beads. The average grain size is about 123 nm, no pores between grains. The XRD test results demonstrate that no monoclinic phase exists in the beads. The sintering temperature of the new process is only 1200 °C.

Preparation of ZrO2 microspheres by spray granulation

Synthesis, Characterization and Application of Submicron ZrSiO4 Powder Via Sol-Gel-microemulsion-hydrothermal Method

Preparation of ZrO 2 beads by an improved micro‐droplet spray forming process

Preparation of spherical zirconia powder by nano-reactor of microemulsion and its densification behavior

Effect of dispersant and binder on the morphology of zirconia granules during spray drying

Preparation of spherical zirconia powder in microemulsion system and its densification behavior

Novel process of preparation of Yttria stabilized ZrO2 small sizes beads using sol-gel method combined with spray granulation technology

Preparation of Ceria-Stabilized Zirconia Microspheres by External Gelation: Size Control

Synthesis of yttria-stabilized zirconia powders for plasma spray by internal gelation

Preparation of Nano-ZrO2 powder via a microwave-assisted hydrothermal method

Study on a new, environmentally benign method and its feasibility of preparing nanometer zirconia powder

Preparations and Characterizations of New Mesoporous ZrO2 and Y2O3-stabilized ZrO2 Spherical Powders

Fabrication of spherical W–ZrC powder for additive manufacturing by spray granulation combined with plasma spheroidization

Study on Preparation of Zirconia Spherical Powder by Nano-reactor of Microemulsion and Its Dispersibility

Fabrication of Submicron Tetragonal Polycrystalline ZrO2 by the Transformation of Micro Monoclinic ZrO2 under High Pressure

Precisely Controlling Preparation of Ceria‐Stabilized Zirconia Microspheres of ~100 Μm by External Gelation

Preparation and properties of yttria-stabilized tetragonal phase zirconia nano-ceramics by high gravity

Manufacturing and properties evaluation of Al2O3/ZrO2 granules derived from sodium alginate gelation

Preparation of nano-sized 6MgO–2Y2O3–ZrO2 powders by a combined co-precipitation and high energy ball milling process

Preparation of spherical ultrafine zirconia powder in microemulsion system and its dispersibility

Carbothermal synthesis of zirconium carbide hollow microspheres from polyzirconoxane and phenolic resin by spray drying