Abstract:Tungsten is a promising material for the plasma-facing components of nuclear fusion reactors due to its resistance to heat flux and plasma influence. However, a transient heating event known as edge localized modes (ELMs) has the potential to modify the tungsten surface by increasing the heat flux to 1–10GW/m 2 and creating a porous resolidified surface. This type of surface damage may then be vulnerable to further ion bombardment, allowing surface ablation to harm fusion operations. As a result, we are motivated to simulate the microstructural ablation of highly porous resolidified tungsten in an ELMs-like heat flux of 46.3GW/m 2 and ion bombardment with electrothermal plasma and focused ion beam (FIB). Compared to the sample as received after the FIB treatment, the porosity of the microstructure increases more with pre-heated tungsten. According to inverse fast Fourier transformation (IFFT) microphotography, the defect density at the near-pore area of tungsten in 46.3 GW/m 2 (2–5 × 10 16 /cm 2 ) is about a factor of ten higher than in the as-received matrix (1–2 × 10 15 /cm 2 ). We discovered that amorphous phase formed preferentially near the pore area, which could be attributed to secondary ion deposition during FIB thinning. We believe the high defect density environment of the tungsten microstructure reveals a vulnerability to ion bombarding ablation. On a miniaturized laboratory scale, our research can demonstrate the last moment of tungsten in extreme fusion environments.

Nanostructure Evolution and Surface Modification of Tungsten Exposed to Low Energy, High Flux Deuterium Plasma

Deuterium-induced Nanostructure Formation on Tungsten Exposed to High-Flux Plasma

Enhanced Modification of Tungsten Surface by Nanostructure Formation During High Flux Deuterium Plasma Exposure

Effects of Tantalum Alloying on Surface Morphology and Deuterium Retention in Tungsten Exposed to Deuterium Plasma

Recent Studies of Tungsten-Based Plasma-Facing Materials in the Linear Plasma Device STEP

Review of Irradiation Damage Behavior of Tungsten Exposed to Plasma in Nuclear Fusion

Deuterium Blistering in Tungsten and Tungsten Vanadium Alloys

Blistering on Tungsten Surface Exposed to High Flux Deuterium Plasma

Surface morphology and deuterium retention in tungsten exposed to high flux D plasma at high temperatures

Fuzz Nanostructure and Erosion on Tungsten–vanadium Alloys Exposed to Helium Plasma in the STEP Linear Plasma Device

Blistering Behavior and Deuterium Retention in Tungsten Vanadium Alloys Exposed to Deuterium Plasma in the Linear Plasma Device STEP

Tungsten Material Behavior under H2, D2, and He Plasma Interaction Conditions in the Framework of Fusion-Relevant Studies

Surface Modification and Deuterium Retention of High Energy Rate Forging W-Y2O3 Exposed to Deuterium Plasma

Microstructural modification of highly porous resolidified tungsten in heat flux of 46.3 GW/m 2 and focused ion beam

Observations of Orientation Dependence of Surface Morphology in Tungsten Implanted by Low Energy and High Flux D Plasma

Surface Modification of W–V Alloy Exposed to High Heat Flux Helium Neutral Beams

Plasma and X-ray radiation-induced damage mechanisms in a tungsten heavy alloy

Surface nano structures on W surface exposed to low-energy high flux D plasma

Surface Cracking of Tungsten-Vanadium Alloys under Transient Heat Loads

Formation process of tungsten nanostructure by the exposure to helium plasma under fusion relevant plasma conditions

Deuterium behavior in tungsten exposed to deuterium plasma with rising or declining temperature