Abstract:Background: Tungsten (W) is a promising candidate for future use in fusion reactors as plasma facing material. During operation it will be exposed to both particle irradiation and high heat flux (HHF) loads. Particle irradiation, especially helium (He), is expected to cause significant surface modifications of W, might leading to performance degradation. The effect of heat loading can accelerate such surface damage. Therefore, the performance of W under the combined action of both heat and particle fluxes has to be investigated in more detail.Purpose:The aim is to investigate the surface modifications of rolled W during exposure to combined heating and He particle flux depending on surface temperature, He flux and fluence.Methods: The He-flux/heating experiments were performed on rolled W samples using the neutral beam HHF test facility GLADIS at IPP Garching, Germany. HHF loads generated with He atoms of 2.4 MW·m?2 and 9.5 MW·m?2 were used. W samples were adiabatically loaded to peak surface temperatures of ~1000 K, ~2000 K and ~3000 K, close to melting. He fluences increased from about 1×1021m?2 to 6×1022 m?2.Results: During He-loading at a low surface temperature (~1000 K), with increasing fluence, defects appeared in grains first, and then blistering was observed on the sample surface, with many ruptured blisters to form lids and grooves. The largest blisters formed on grains with near <001> surface normal. As fluence was increased continuously, small holes were formed on the surface, and the grooves still existed. However, at intermediate surface temperature (~2000 K), with increasing fluence, the damage morphology changed from a porous structure with blisters,via a porous structure with grooves, to a small coral-like structure. At high surface temperature (~3000 K), an evolution from a porous structure to a coral-like structure with increasing fluence was observed, and the coral-like structure changed little as the increasing of fluence continuously. It is shown that the surface modification of rolled W is dependent on a competitive relationship between the formation of blisters and coral-like structures. To study the behaviour of such He damaged surfaces under fusion relevant transient heat loads, 0.9GW·m?2 Edge Localized Modes (ELMs)-like laser thermal shocks were applied. Local melting was observed on the coral-like structure after thermal shocks.Conclusion: The damage morphology of rolled W changes from blisters with a grain orientation dependence to a porous/coral-like structure with increasing temperature, because at high temperatures the Hen and HenVm (He-vacancy) clusters will be broken up and He will diffuse relatively deeply into the W bulk. This transformation of damage morphology can also be induced by the rise of He fluence.

Microstructural modification of highly porous resolidified tungsten in heat flux of 46.3 GW/m 2 and focused ion beam

Nanostructure Evolution and Surface Modification of Tungsten Exposed to Low Energy, High Flux Deuterium Plasma

Experimental and Numerical Simulations of ELM-like Transient Damage Behaviors to Different Grade Tungsten and Tungsten Alloys

The Microstructural and Hardness Changes of Tungsten Fiber after Au2+ Irradiation

Erosion dynamics of tungsten fuzz during ELM-like heat loading

Highly porous tungsten for plasma-facing applications in nuclear fusion power plants: a computational analysis of hollow nanoparticles

Fuzz Nanostructure and Erosion on Tungsten–vanadium Alloys Exposed to Helium Plasma in the STEP Linear Plasma Device

Experimental and simulation studies on damage mechanisms of tungsten and molybdenum under compressed plasma flow irradiation

Surface Modification of W–V Alloy Exposed to High Heat Flux Helium Neutral Beams

Recent Studies of Tungsten-Based Plasma-Facing Materials in the Linear Plasma Device STEP

Enhanced Modification of Tungsten Surface by Nanostructure Formation During High Flux Deuterium Plasma Exposure

Surface modifications of rolled W during exposure to high heat loads with He

He-ion induced surface morphology change and nanofuzz growth on hot tungsten surfaces

Surface Cracking of Tungsten-Vanadium Alloys under Transient Heat Loads

Damages on Pure Tungsten Irradiated by Compression Plasma Flows

Molecular-Dynamics Analysis of the Mechanical Behavior of Plasma-Facing Tungsten

Demonstrating tungsten fiber-reinforced porous-matrix tungsten composites for future fusion application

Review of Irradiation Damage Behavior of Tungsten Exposed to Plasma in Nuclear Fusion

Comparative study of ITER conform tungsten grades exposed to high heat flux and neutron irradiation damage

Progress in Irradiation Damage of Tungsten and Tungsten Alloys Under Different Irradiation Particles

Microstructure-based crack formation in tungsten exposed to cyclic transient heating