Abstract:Double-pipe heat exchangers are widely used in the high-pressure and high-temperature applications for their simple and tight tube-in-tube configuration, but therefore normal and stable operation of such pressure-bearing equipment turns to be of greater significance because potential safety risks and economic losses will be aroused if failures occur on them. To deal with this issue, abundant researches have been conducted so far, however most of them focused on the flow and fluid characteristics by numerical simulation and experimental verification, while little attention was paid to the actual cases from the engineering practice. In this paper, such an actual failure case study concerning leakage on the jacket pipe of one double-pipe heat exchanger in a high-pressure polyethylene facility is addressed. In order to find out the causes of this failure, investigation including materials inspection, chemical phase analysis, microscopic morphologies observation, micro-area chemical compositions detection and finite element analysis etc. was carried out. The results indicated that the leakage was firstly induced by the uniform corrosion and the under-deposit corrosion successively, and then stimulated by the effect of erosion from the complicated fluid characteristics around the tee structure. Finally, the related mechanisms of this synergistic effect between corrosion and erosion were discussed, and the pertinent countermeasures from both design and maintenance point of view were proposed, including descaling of the fouled inner pipe, improvement of the circulation cooling water quality, and upgrading of the pipe materials etc. Achievement of this paper will supplement the failure cases database of double-pipe heat exchangers, based on which design optimization and failure prevention will be possible.

Failure Analysis on Premature Fracture of Polyethylene Pipe for Floor Heating System

Viscoelastic and Damage Model of Polyethylene Pipe Material for Slow Crack Growth Analysis

Prediction of Ductile Rupture Failure Life of HDPE Pipe

Experimental and Numerical Investigation on the Seismic Behavior of above Ground High Density Polyethylene Pipe in Nuclear Power Plant

Probabilistic model to predict longitudinal fracture failure of buried pvc pipes

Failure Prediction Model and Influence Parameter Analysis of Buried Cast Iron Water Mains

Investigation on Failure Mode of Short Carbon Fiber Reinforced Thermoplastic Composites Joints of Non-metallic Pipeline

Research on Phased Array Ultrasonic Technique for Testing Butt Fusion Joint in Polyethylene Pipe

Investigation On Creep-Rupture Failure Time Of Hdpe Pipe Under Hydrostatic Pressure

The performance and causes of failure of polyethylene pipes subjected to constant and fluctuating internal pressure loadings

Applicability Analysis of Thermoplastic Material As Liner Pipe for Trenchless Rehabilitation of Thermal Pipelines

The failure mechanism of field polyethylene gas pipeline with gas leakage at electrofusion joint

A Comprehensive Review of Polyethylene Pipes: Failure Mechanisms, Performance Models, Inspection Methods, and Repair Solutions

Safety Assessment of High Density Polyethylene Pipe with Thermal Damages

Thermal–mechanical Fatigue Behaviour of P92 T-piece and Y-piece Pipe

Failure analysis of a reinforced thermoplastic pipe used in an oil transportation system

Failure Analysis on Leaked Jacket Pipe of Double-Pipe Heat Exchanger in High-Pressure Polyethylene Facility

Research On Safety Assessment Method For Pressure Pipe With Incomplete Welding Defects Under Complicated Loadings

Thermal-Mechanical Fatigue Behavior of P92 T-Piece Pipe

Failure Analysis of Bursting on the Inner Pipe of A Jacketed Pipe in A Tubular Heat Exchanger

CCG of PE100 and Life Prediction of PE Pipe With Axial Semi-Elliptical Crack