Abstract:High-density polyethylene (HDPE) materials have many applications in the municipal solid waste (MSW) landfills. HDPE gravity drainage pipes are commonly utilized in MSW landfills because of the polymer's resistance to harsh chemical conditions. When landfill wastes are freshly filled, the weight acting on the leachate collection pipe increases. The temperature of the leachate collection pipe increases as a result of the heat produced by the decomposition of organic components after waste filling. In this paper, the effects of sequentially applying pressure and elevating temperature on the deformation characteristics (such as deformations and strains) of HDPE pipes are investigated. Measurements of pipe deformations and circumferential strains from model experiments in which 110 mm HDPE pipes were backfilled with sand and subjected to 300 kPa of maximum vertical pressure at temperatures of 20, 60 and 80 °C showed the following results: (1) a classification of pipe behavior relative to the surrounding soil stiffness is advantageous for HDPE pipe design; (2) when temperature increases to 60 °C and 80 °C, the strain distribution around the pipe changes from V-shaped to U-shaped, and the pipe deformation profile changes from elliptical to rectangular; (3) when temperature increases from 20 °C to 60 °C, the vertical and horizontal pipe deflections increase by a factor of 1.08~1.19; (4) when temperature increases from 60 °C to 80 °C, the vertical and horizontal pipe deflections increase by a factor of 1.15~1.31; and (5) the existing analytical method that considers two extreme interfaces can capture the deformations measured in the model test well. In addition, preliminary recommendations for the design of leachate collection pipes are provided based on the analysis of differences in pipe profile versus temperature.

Safety Assessment of High Density Polyethylene Pipe with Thermal Damages

Effect Simulation of Fire Damage to Thermal Performance of High Density Polyethylene Pipe

Influence of Fire Damage on Mechanical Properties of High Density Polyethylene Pipe Material

Assessment Methods and Progress of Fitness-for-service forPolyethylene Pipes after Fire Damage

Viscoelastic and Damage Model of Polyethylene Pipe Material for Slow Crack Growth Analysis

Effects of Physical Aging on Thermomechanical Behaviors of Poly(ethylene Terephthalate)-Glycol (PETG)

Experimental and Numerical Investigation on the Seismic Behavior of above Ground High Density Polyethylene Pipe in Nuclear Power Plant

Electrical Treeing Behavior of DC and Thermally Aged Polyethylenes Utilizing Wire-Plane Electrode Geometries

The Effect of DC Electro-thermal Ageing on Electrical Treeing in Polyethylene

Investigation on Thermal Aging and Degradation of XLPE for High Voltage Cable Applications

The aging behavior of HDPE pipe bodies and butt-fusion welded joints: effects of thermal oxidative and hydrothermal accelerated aging

Accelerated Hydrothermal Aging and Degradation Mechanism of PE100 Butt-Fusion Welded Joint

Degradation of Sunlight Exposure on the High-Density Polyethylene (HDPE) Pipes for Transportation of Natural Gases

Failure Analysis on Premature Fracture of Polyethylene Pipe for Floor Heating System

Applicability Analysis of Thermoplastic Material As Liner Pipe for Trenchless Rehabilitation of Thermal Pipelines

Study on the Allowable Temperature for Preventing Over Welding During Thermal Welding of Polyethylene Pipe

Investigation on the Allowable Temperature During Electrofusion Welding of Polyethylene Pipe

Feasibility of Nonlinear Ultrasonic Method to Characterize the Aging Degree of Polyethylene Pipes

The performance and causes of failure of polyethylene pipes subjected to constant and fluctuating internal pressure loadings

Investigating the Deformation Characteristics of Buried High-Density Polyethylene Pipes: Considering the Effect of Sequentially Applying Pressure and Elevating Temperature

The effect of high-temperature annealing on thermal properties and morphology of polyethylene pipes prepared by rotational shear