Abstract:Abstract Multifunctional composites including polymer electrolyte coated carbon fibres and polymer matrix systems gained recent interest in light-weight design related research areas. Compared to classical fibre reinforced plastics, the interphase, made by electropolymerisation on the fibre surface, represents a new, third material phase. The coating serves as ion-conducting separator in structural batteries and as insulating layer in energy transmitting multifunctional composites. The importance of this study is related to the fact, that multifunctional applications, based on such composites, are exposed to temperature changes in many cases. The coating material, acting as thin interphase, shows a significant temperature dependant Young’s modulus, determining the overall macroscopic behaviour under thermal loads. The new influences on the effective elastic properties of the composite are determined in this work in a 3D microstructural simulation approach based on a unit cell geometry. For the first time, the resulting effective properties are discussed towards the state of research and future work. First, the effective elastic stiffness is computed by isothermal virtual material testing, applying unit strain modes on the unit cell. Second, a uniform temperature change is applied and the effective thermal expansion coefficients are computed. The results show that a change of stiffness in the coating domain has a great influence on the effective stiffness in the transversal isotropic plane. The effective thermal expansion of the composite is also highly sensitive to the thermal expansion behaviour of the coating phase. Main conclusions are drawn towards multiphysical material simulation: Influences of the coating material properties have to be taken into account to compute effective properties. In particular, it is necessary to include the temperature dependant stiffness and the coefficients of thermal expansion of the interphase, which affect effective properties significantly. A thermo-mechanic coupled microscale model is needed to represent in-situ properties of such composites for applications with heat exposure.

Thermal and Vibration Mechanical Reliability of Multicoat Compound Thin-Film Thermocouple

Stress Analysis of Thin Film Thermocouple Sensor Based on Finite Element Simulation

A Study on the Interface Diffusion of In2O3/ITO Multilayer Thin-Film Thermocouple

Thermal stress concentration points and stress mutations in nano-multilayer film structures

Computational analysis of thin coating layer failure using a cohesive model and gradient plasticity

High-Temperature Failure Evolution Analysis of K-Type Film Thermocouples

Thermal shock behaviour and failure mechanism of two-kind Cr coatings on non-planar structure

Simulation of High Temperature Friction Stress Field of Multiphase Composite Coating Based on Crystal Microscopic Finite Element Method

Analysis of Thermal Stress in Vanadium Dioxide Thin Films by Finite Element Method

Finite Element Analysis of Interface Undulation and Interface Delamination in the MCrAlY Coating System Under Thermal Cycling: Considering Oxide Thickness and Top-Coat Effects

Thermal fatigue failure mechanism in the joint of nano Cu/Ti–Si 3 N 4 ceramic substrates after thermal fatigue test

Stability and thermoelectric properties of ITON:Pt thin film thermocouples

Effective stiffness and thermal expansion of three-phase multifunctional polymer electrolyte coated carbon fibre composite materials

Research on the contact fatigue failure of thermal sprayed coating based on infrared thermography

Elastic and elastic-plastic analysis of multilayer thin films filled with heterogeneous materials

An Experimental Investigation of Failure Behavior of Conducting Polythiophene Coating Films

Shakedown Analysis and Experimental Study of Thermal Barrier Coatings

The thermo-mechanical coupling failure mechanisms of C/SiC riveted joint considering deposited SiC matrix and interference fit

Thermal-mechanical Reliability Assessment of TSV Structure for 3D IC Integration

Analysis On Stress Distribution Of Thermal Barrier Coating System With Thermal Gradient Mechanical Fatigue

Simulation of Residual Stresses and Their Effects on Thermal Barrier Coating Systems Using Finite Element Method