Simulation of High Temperature Friction Stress Field of Multiphase Composite Coating Based on Crystal Microscopic Finite Element Method

Huang Xiao,Zhai Aoshuang,Zhang Fengjiao,Wang Junyu,Shao Tianmin

DOI: https://doi.org/10.11933/j.issn.1007-9289.20211106002

2022-01-01

China surface engineering

Abstract:Thermal sprayed NiCr-Cr3C2-CaF2/BaF2 composite coatings can be used as high-temperature wear-resistant material for aeroengine brush seal runway. High temperature friction and wear produces a coupling stress field formed by the superposition of thermal stress and friction stress. At the same time, the morphology and properties of each phase in the composite coating will have a significant impact on the coupling stress field. The thermal-mechanical coupling stress field simulation study of multiphase composite coatings under high temperature friction and wear conditions is still insufficient. The coupling stress distribution is simulated by finite element method to predict the potential failure mode of the coating and provide a basis for the design of brush sealing coating. Based on Voronoi polygon, the crystal micro finite element model of NiCr-Cr3C2-CaF2/BaF2 multiphase composite coating is established. The proportion, distribution morphology and thermal-mechanical parameters of each phase in the composite coating is simulated, and the von Mises stress and the first principal stress distribution under thermal-mechanical coupled conditions is obtained. The results show that the stress of the composite coating is significantly higher than that of the uniform coating, especially at the tip of the hard phase. Improving the morphology of the phase and passivating the acute angle can effectively alleviate the local intense stress. At the same time, the thermal-mechanical coupling stress field is closely related to the elastic modulus of bonded phase and hard phase. Mises stress and tensile stress of composite coating can be effectively controlled by adjusting the modulus of each phase. The thermal-mechanical coupling stress field simulation based on the microscopic finite element method provides a theoretical basis for the optimal design of multiphase composite coatings under high temperature friction and wear conditions.