Abstract:Understanding fuel system behavior during postulated loss-of-coolant accidents is pertinent for continued safe and efficient operation of light water reactors, particularly as higher burnups are being pursued and safety margins re-evaluated. Conventional mechanical models for the incumbent Zr alloys typically rely on the assumption that steady-state creep is the dominant fuel cladding response during transient accident conditions. To investigate this assumption, simulated accident burst testing was performed on Zircaloy-4 claddings with balloon behavior measured in-situ . Two distinct loading conditions were utilized during burst testing: (1) constant-gas-inventory where pressure was allowed to increase with temperature and (2) constant pressure. In-situ strains and strain rates were measured via 2-dimensional digital image correlation techniques and synchronized with temperature to determine deformation dependencies. The temperature dependence of strain rate was characterized by a two segment Arrhenius relationship, with a distinct transition between the high and low temperature/strain regimes. The average activation energy of the lower temperature/strain regime was 328 ± 25 kJ/mol, in agreement with the ∼320 kJ/mol used for conventional LOCA models. However, the higher temperature/strain segment, which encompassed most of ballooning, showed increased activation energies as well as a dependence on whether the burst region was in view. For tests that burst away from the camera view, the average high temperature/strain segment activation energy was 635 ±150 kJ/mol. For samples where the rupture opening formed in view, the average activation energy was 1015 ± 179 kJ/mol. This observed shift in temperature dependence indicates a transition in deformation mechanism at the end of life, possibly to time independent failure mechanisms, which has not yet been visualized in the literature for Zr alloys. Parameters at the transition points were analyzed to determine thresholds for this change in behavior, which occurred at an average hoop strain of 6.9 ± 2.1 %.

Influence of temperature and hydrogen content on the transverse mechanical properties of Zircaloy-4 fuel cladding

A comparative study of hydride-induced embrittlement of Zircaloy-4 fuel cladding tubes in the longitudinal and hoop directions

Temperature-dependent axial mechanical properties of Zircaloy-4 with various hydrogen amounts and hydride orientations

Hydride-Induced Responses in the Mechanical Behavior of Zircaloy-4 Sheets

Revealing the role of hydrogen content on the mechanical behavior and cracking mechanisms of Zircaloy-4 under strain

Effect of hydrogen contents on the mechanical properties of Zircaloy-4

Effects of Pre-Crack Depth and Hydrogen Absorption on the Failure Strain of Zircaloy-4 Cladding Tubes Under Biaxial Strain Conditions

Assessing the fracture toughness of Zircaloy-4 fuel rod cladding tubes: impact of delayed hydride cracking

Investigation on Hydrogen Embrittlement and Failure Characteristics of Zr-4 Cladding Based on the GTN Method

The influence of solid solution hydrogen and precipitated hydride on the creep behavior of Zircaloy-4

In-situ determination of strain during transient burst testing and the temperature dependence of Zircaloy-4 claddings

Ductile tearing criteria and failure probability estimation of hydrided Zircaloy-4 cladding under axial loads

Hydrogen uptake of zirconium alloys in defective fuel rods: Experiment and numerical model

Potential Impact of Accident Tolerant Fuel Cladding Critical Heat Flux Characteristics on the High Temperature Phase of Reactivity Initiated Accidents

Thermomechanical Assessment of Fuel Rod Cladding Made of Zirconium Alloy and Silicon Carbide Material During Reactivity-Initiated Accident

Three-dimensional Numerical Simulation of Hydrogen-Induced Multi-Field Coupling Behavior in Cracked Zircaloy Cladding Tubes

Metallographic Examination and Hydrogen Measurements of High-Burnup Spent Nuclear Fuel Cladding

A study on the fracture pattern change of high-burnup fuel cladding failed by pellet-cladding mechanical interaction failure under reactivity-initiated accident conditions

Effect of temperature on the fretting wear behavior of Cr-coated Zircaloy cladding in high-temperature pressurized water

Effect of Irradiation Creep on Hydrogen-pick-up Induced Multi-field Coupling Behavior in Zircaloy Cladding Tube

Behavior of high-velocity oxygen fuel sprayed chromium-coating on Zircaloy-4 fuel cladding under loss-of-coolant accident conditions