Abstract:Within plate-type dispersion nuclear fuel elements, the metal matrix and cladding attacked continuously by fast neutrons undergo irradiation hardening, which might have remarkable effects upon the mechanical behaviors within fuel elements. In this paper, with the irradiation hardening effect of metal materials mainly considered together with irradiation growth effect of the cladding, the three-dimensional large-deformation constitutive relations for the metal matrix and cladding are developed. The method of virtual temperature increase in the previous studies is further developed to model the irradiation swelling of fuel particles; the method of anisotropic thermal expansion is introduced to model irradiation growth of the cladding; and a method of multi-step-temperature loading is proposed to simulate the coupling features of irradiation-induced swelling of the fuel particles together with irradiation growth of the cladding. Above all, based on the developed relationship between irradiation growth at certain burnup and the loaded virtual temperatures, with considering that certain burnup corresponds to certain fast neutron fluence, the time-dependent constitutive relation due to irradiation hardening effect is replaced by the virtual-temperature-dependent one which is introduced into the commercial software to simulate the irradiation hardening effects of the matrix and cladding. Numerical simulations of the irradiation-induced mechanical behaviors are implemented with the finite element method in consideration of the micro-structure of the fuel meat. The obtained results indicate that when the irradiation hardening effects are introduced into the constitutive relations of the metal matrix and cladding: (1) higher maximum Mises stresses for certain burnup at the matrix exist with the equivalent plastic strains remaining almost the same at lower burnups; (2) the maximum Mises stresses for certain burnup at the cladding are enhanced while the maximum equivalent plastic strains are reduced; and (3) the maximum first principal stresses for certain burnup at the matrix or the cladding are lower than the ones without the hardening effect, and the differences are found to increase with burnup; and the variation rules of the interfacial stresses are similar.

Effect of Irradiation Creep on Hydrogen-pick-up Induced Multi-field Coupling Behavior in Zircaloy Cladding Tube

Three-dimensional Numerical Simulation of Hydrogen-Induced Multi-Field Coupling Behavior in Cracked Zircaloy Cladding Tubes

Effects of Irradiation Hardening and Creep on the Thermo-Mechanical Behaviors in Inert Matrix Fuel Elements

Simulation of Irradiation Hardening of Zircaloy Within Plate-Type Dispersion Nuclear Fuel Elements

Effects of Irradiation on the Multi-Field Coupling Delayed Hydride Cracking Behavior of Zirconium Alloys

Hydrostatic Pressure Effect of Fission Gas Swelling in UMo/Al Dispersion Fuel Plate

The influence of solid solution hydrogen and precipitated hydride on the creep behavior of Zircaloy-4

SIMULATION OF THE DELAYED HYDRIDE CRACKING VELOCITY FOR ZIRCONIUM ALLOY MATERIALS CONSIDERING IRRADIATION EFFECTS

Effects of Pre-Crack Depth and Hydrogen Absorption on the Failure Strain of Zircaloy-4 Cladding Tubes Under Biaxial Strain Conditions

Simulation of the Irradiation-Induced Thermo-Mechanical Behaviors Evolution in Monolithic U–Mo/Zr Fuel Plates under a Heterogeneous Irradiation Condition

Effects of Irradiation Growth on the Thermo-Mechanical Behaviors Evolution in Inert Matrix Fuel Elements

Effects of U-Mo Irradiation Creep Performance on the Thermo-Mechanical Coupling Behavior in U-Mo/Al Monolithic Fuel Assemblies

Simulation of the coupling behaviors of particle and matrix irradiation swelling and cladding irradiation growth of plate-type dispersion nuclear fuel elements

On the effect of nuclear fission cladding stresses on Zirconium hydride orientation and dislocation strain energy fields via Discrete Dislocation Plasticity and Crystal Plasticity Finite Element modelling

A comparative study of hydride-induced embrittlement of Zircaloy-4 fuel cladding tubes in the longitudinal and hoop directions

Effects of Porous Fuel Structure on the Irradiation-Induced Thermo-Mechanical Coupling Behavior in Monolithic Fuel Plates

Thermal-fluid-structure Coupling Analysis for Plate-Type Fuel Assembly under Irradiation. Part-I Numerical Methodology

Thermal Creep Effects of Aluminum Alloy Cladding on the Irradiation-Induced Mechanical Behavior in U–10Mo/Al Monolithic Fuel Plates

Research on In-Pile Thermal-Mechanical Behavior of UMo/Zr Monolithic Fuel Plates

Thermal-fluid-structure coupling analysis on plate-type fuel assembly under irradiation. Part-II Mechanical deformation and thermal-hydraulic characteristics

Influence of temperature and hydrogen content on the transverse mechanical properties of Zircaloy-4 fuel cladding