Abstract:The diffusion of hydrogen in Zircalloy fuel cladding components and its associated delayed hydride cracking (DHC) mechanism remain a bottleneck in nuclear fission. Through Crystal Plasticity Finite Element (CPFE) analysis at the grain scale (μm) and Discrete Dislocation Plasticity (DDP) at the hydride scale (nm), we explore how cladding stress history influences the dislocation network in a system of hydrides, and in turn, how this can impact hydrogen accumulation and embrittlement. CPFE indicates that high tensile stresses at service temperature can cause severe plasticity at a notch of a cladding component, leading to significant residual compressive stresses on service shutdown. As a result, hydrides evolve in this service scenario under a cyclic tensile-compressive background stress, which is found to enhance the ratchetting of dislocations compared to a typical constant background stress history and to eliminate the concentration of tensile residual hydrostatic stresses at the locations of dissolved hydrides. Since these tensile residual stresses drive the local accumulation of hydrogen during progressive precipitation-dissolution cycles, a key question is posed as to whether and how the sequencing of cladding stress-temperature reversals influences the growth rate of macro-hydride colonies. Simultaneously, we find that a large fraction of the total strain energy of hydrides is associated with the strain energy of dislocations and their interactions, posing the question of whether dislocation networks influence the energetically favourable hydride orientation. Our study provides a foundation for future studies of the DHC mechanism and drives the development of thermodynamically consistent dislocation-based models coupled with irradiation effects.

The influence of solid solution hydrogen and precipitated hydride on the creep behavior of Zircaloy-4

Numerical Simulation on Hydrogen Induced Cracking Behavior of 4130X Hydrogen Storage Vessel with Defect

Revealing the role of hydrogen content on the mechanical behavior and cracking mechanisms of Zircaloy-4 under strain

Effect of Irradiation Creep on Hydrogen-pick-up Induced Multi-field Coupling Behavior in Zircaloy Cladding Tube

Influence of temperature and hydrogen content on the transverse mechanical properties of Zircaloy-4 fuel cladding

Hydride-Induced Responses in the Mechanical Behavior of Zircaloy-4 Sheets

Effects of Pre-Crack Depth and Hydrogen Absorption on the Failure Strain of Zircaloy-4 Cladding Tubes Under Biaxial Strain Conditions

A comparative study of hydride-induced embrittlement of Zircaloy-4 fuel cladding tubes in the longitudinal and hoop directions

Effect of Creep Stress Level on Hydrogen Embrittlement Mechanism of Al-Zn-Mg-Cu Alloy

Effect of hydrogen contents on the mechanical properties of Zircaloy-4

Hydride growth mechanism in zircaloy-4: Investigation of the partitioning of alloying elements

High Temperature Creep Behavior of Hydrogenated Ti-6Al-4V Alloy

On the effect of nuclear fission cladding stresses on Zirconium hydride orientation and dislocation strain energy fields via Discrete Dislocation Plasticity and Crystal Plasticity Finite Element modelling

High-throughput Computing for Hydrogen Transport Properties in Ε-Zrh2

Temperature-dependent axial mechanical properties of Zircaloy-4 with various hydrogen amounts and hydride orientations

Investigation on Hydrogen Embrittlement and Failure Characteristics of Zr-4 Cladding Based on the GTN Method

Ductile tearing criteria and failure probability estimation of hydrided Zircaloy-4 cladding under axial loads

On the interaction of grain-scale and hydride-scale stresses in hydrogen enriched zirconium alloy nuclear cladding via combined discrete dislocation plasticity and crystal plasticity finite element modelling

Hydrogen in zirconium alloys: A review

Influence of Alloying Elements and Effect of Stress on Anisotropic Hydrogen Diffusion in Zr-Based Alloys Predicted by Accelerated Kinetic Monte Carlo Simulations

Effect of hydride orientation on tensile properties and crack formation in zirconium alloy cladding tubes