Abstract:Zircaloy-4 is used as a fuel cladding material for water reactors, as it has good mechanical properties, corrosion resistance, and a low thermal neutron absorption cross section. However, the mechanical performance of Zircaloy-4 can be reduced during service due to hydrogen uptake and hydride formation. These hydrides are brittle, and often reduce the strength and toughness of materials as well as increase susceptibility to delayed hydride cracking (DHC). In this work, large grain Zircaloy-4 with hydrides was prepared and then cross sectioned using cryo-ion beam polishing, using plasma focused ion beam (pFIB) and broad ion beam (BIB) approaches to enable the preparation of a very high quality flat surface with no preferential etching of either the hydride or zirconium metal (typically metallographic polishing preferentially removes hydrides). Conventional and high angular resolution electron backscatter diffraction (EBSD) analysis were then used to explore morphology, deformation fields, and orientation relationships between the zirconium matrix and hydrides. Four maps were collected for analysis which included hydrides near grain boundaries: (a) where the hydride smoothly decorates across two of the connecting boundaries near a triple junction; (b) where the hydride smoothly decorates the boundary; (c) a mixture of smooth decoration of the interface and protrusion into the grains; (d) fine scale hydride that protrudes into one grain. This work highlights that incompatibility of the hydride within the zirconium matrix is strongly linked to the orientation relationship of the hydride and matrix, and the grain boundary character. These results may enable enhanced understanding of the role of hydrides in fracture as well as stress-induced hydride reorientation and DHC susceptibility.

Effects of Irradiation on the Multi-Field Coupling Delayed Hydride Cracking Behavior of Zirconium Alloys

Multi-physics Modeling of Delayed Hydride Cracking in Zirconium Alloys

Numerical Analysis of Multi-Field Coupling Behaviors of Delayed Hydride Cracking for Thin Plate-Type Zr-2.5Nb Specimens

SIMULATION OF THE DELAYED HYDRIDE CRACKING VELOCITY FOR ZIRCONIUM ALLOY MATERIALS CONSIDERING IRRADIATION EFFECTS

Three-dimensional Numerical Simulation of Hydrogen-Induced Multi-Field Coupling Behavior in Cracked Zircaloy Cladding Tubes

Modeling and tests on the damage and fracture behaviors of non-irradiated zirconium alloys with different hydrogen concentrations at RT and 350°C

Effect of Heating Rate on Hydride Reorientation Behavior of Zirconium Alloy Tubes under Non-Stress Loading

On the interaction of grain-scale and hydride-scale stresses in hydrogen enriched zirconium alloy nuclear cladding via combined discrete dislocation plasticity and crystal plasticity finite element modelling

Theoretical Models of Threshold Stress Intensity Factor and Critical Hydride Length for Delayed Hydride Cracking Considering Thermal Stresses

Revealing the role of hydrogen content on the mechanical behavior and cracking mechanisms of Zircaloy-4 under strain

Modeling of Zirconium Atom Redistribution and Phase Transformation Coupling Behaviors in U-10Zr-Based Helical Cruciform Fuel Rods under Irradiation

Effect of hydride orientation on tensile properties and crack formation in zirconium alloy cladding tubes

Hydride precipitation dependence on α-parent orientation and plastic deformation in zirconium alloys

On the effects of transformation strain induced by hydride precipitation

High-throughput Computing for Hydrogen Transport Properties in Ε-Zrh2

An in-situ TEM investigation of microstructure evolution in Cr-coated zirconium alloy under heavy ion irradiation: Simultaneous evolution of both Cr coating and Zr-4 matrix

Effect of Irradiation Creep on Hydrogen-pick-up Induced Multi-field Coupling Behavior in Zircaloy Cladding Tube

Characterization of local deformation around hydrides in Zircaloy-4 using conventional and high angular resolution electron backscatter diffraction

On the effect of nuclear fission cladding stresses on Zirconium hydride orientation and dislocation strain energy fields via Discrete Dislocation Plasticity and Crystal Plasticity Finite Element modelling

Thermodynamics and Kinetics of Delayed Hydride Cracking in Zirconium Alloys: a review.

Investigation of δ zirconium hydride morphology in a single crystal using quantitative phase field simulations supported by experiments