Abstract:Understanding fuel system behavior during postulated loss-of-coolant accidents is pertinent for continued safe and efficient operation of light water reactors, particularly as higher burnups are being pursued and safety margins re-evaluated. Conventional mechanical models for the incumbent Zr alloys typically rely on the assumption that steady-state creep is the dominant fuel cladding response during transient accident conditions. To investigate this assumption, simulated accident burst testing was performed on Zircaloy-4 claddings with balloon behavior measured in-situ . Two distinct loading conditions were utilized during burst testing: (1) constant-gas-inventory where pressure was allowed to increase with temperature and (2) constant pressure. In-situ strains and strain rates were measured via 2-dimensional digital image correlation techniques and synchronized with temperature to determine deformation dependencies. The temperature dependence of strain rate was characterized by a two segment Arrhenius relationship, with a distinct transition between the high and low temperature/strain regimes. The average activation energy of the lower temperature/strain regime was 328 ± 25 kJ/mol, in agreement with the ∼320 kJ/mol used for conventional LOCA models. However, the higher temperature/strain segment, which encompassed most of ballooning, showed increased activation energies as well as a dependence on whether the burst region was in view. For tests that burst away from the camera view, the average high temperature/strain segment activation energy was 635 ±150 kJ/mol. For samples where the rupture opening formed in view, the average activation energy was 1015 ± 179 kJ/mol. This observed shift in temperature dependence indicates a transition in deformation mechanism at the end of life, possibly to time independent failure mechanisms, which has not yet been visualized in the literature for Zr alloys. Parameters at the transition points were analyzed to determine thresholds for this change in behavior, which occurred at an average hoop strain of 6.9 ± 2.1 %.

Hydrogen uptake of zirconium alloys in defective fuel rods: Experiment and numerical model

Modeling and tests on the damage and fracture behaviors of non-irradiated zirconium alloys with different hydrogen concentrations at RT and 350°C

Hydrogen in zirconium alloys: A review

Assessing the fracture toughness of Zircaloy-4 fuel rod cladding tubes: impact of delayed hydride cracking

High-throughput Computing for Hydrogen Transport Properties in Ε-Zrh2

Influence of kinetic effects on terminal solid solubility of hydrogen in zirconium alloys

Continuum model for hydrogen pickup in Zirconium alloys of LWR fuel cladding

Quantifying the effect of hydride microstructure on zirconium alloys embrittlement using image analysis

Influence of temperature and hydrogen content on the transverse mechanical properties of Zircaloy-4 fuel cladding

Kinetic Model of Incipient Hydride Formation in Zr Clad under Dynamic Oxide Growth Conditions

Revealing the role of hydrogen content on the mechanical behavior and cracking mechanisms of Zircaloy-4 under strain

Effects of Pre-Crack Depth and Hydrogen Absorption on the Failure Strain of Zircaloy-4 Cladding Tubes Under Biaxial Strain Conditions

In-situ determination of strain during transient burst testing and the temperature dependence of Zircaloy-4 claddings

Corrosion of Zirconium Alloys Used for Nuclear Fuel Cladding

Structure and Thermodynamical Properties of Zirconium hydrides from first-principle

Hydrogen diffusion in zirconium hydrides from on-the-fly machine learning molecular dynamics

Long-Term Oxidation of Zirconium Alloy in Simulated Nuclear Reactor Primary Coolant—Experiments and Modeling

Modeling of Zirconium Atom Redistribution and Phase Transformation Coupling Behaviors in U-10Zr-Based Helical Cruciform Fuel Rods under Irradiation

Evaluation of Fracture Resistance Behavior of Zircaloy Fuel Clad Tubes of Indian PHWRs Using Experiments on Ring Specimens and Continuum Damage Mechanics Models

Hydrogen Permeation Characteristic of Nanoscale Passive Films Formed on Different Zirconium Alloys

Hydride growth mechanism in zircaloy-4: Investigation of the partitioning of alloying elements