Abstract:During Molten Fuel Coolant Interaction (MFCI) occurring in a Sodium-cooled Fast Reactor (SFR) following a severe accident, the corium jet breaks up into coarse droplets due to hydrodynamic instabilities and fine flaked debris are generated due to the thermal stress cracking occurring on the solidifying droplet. In particular mixed oxide core debris quenched by liquid sodium are more prone to thermal stress cracking because of the excellent heat transport properties of liquid sodium, which leads to a large temperature gradient across the crust of the ceramic fuel. In this paper, thermal stress initiated cracking of solid crust of the nuclear fuel droplet is studied using Fracture Bifurcation Theory (FBT) and Minimum Potential Energy Principle (MPEP). FBT is able to predict the minimum crack length needed for crack propagation or catastrophic failure depending on the computed K I values. On the other hand, MPEP can predict the periodic and hierarchical cracking pattern that can develop on the core debris. This helps in the prediction of number of cracks and the crack length that can develop on the solid crust. Parametric studies have been carried out by varying MOX droplet sizes, crust thickness and cooling conditions and calculating K I by semi-analytical means and comparing it with K IC . The analysis revealed that solidifying droplets with radius equal to or more than 2 mm are susceptible to thermal stress initiated crack growth and catastrophic breakage even if a few tens of micron size initial crack develops on its surface. Then a particular case of 2 mm radius core debris is considered and its cracking pattern is studied by applying MPEP. This optimal crack configuration is obtained by minimizing potential energy for a given range of crack length and spacing. The analysis has been carried out with ANSYS APDL code which calculates the strain energy for a given initial crack length and spacing. The 2D computational model is validated with a similar study carried out for Alumina disc quenched in water and the results are in good agreement. The minimum fine fragment size predicted by the analysis for mixed oxide debris is a flake like debris with equivalent radius of 41 μm when approximated to be a sphere. The particle size correlates well with the fine debris sizes reported in literature of MFCI experiments.

Evaluation of Fracture Resistance Behavior of Zircaloy Fuel Clad Tubes of Indian PHWRs Using Experiments on Ring Specimens and Continuum Damage Mechanics Models

Modeling and tests on the damage and fracture behaviors of non-irradiated zirconium alloys with different hydrogen concentrations at RT and 350°C

Modeling of Flux-Dependent Fluence Effect on In-Reactor Deformation in Zr-alloy Tubes

Experimental evaluation of orientation and temperature dependent material stress-strain curves of Zr2.5%Nb Indian pressure tube material and development of a suitable anisotropic material model

Theoretical Models of Threshold Stress Intensity Factor and Critical Hydride Length for Delayed Hydride Cracking Considering Thermal Stresses

In situ X-ray computed micro-tomography imaging of failure processes in Cr-coated Zircaloy nuclear fuel cladding materials

Assessing the fracture toughness of Zircaloy-4 fuel rod cladding tubes: impact of delayed hydride cracking

Modeling of Irradiation-Induced Damage and Failure Behaviors of Fuel Foil/cladding Interface in UMo/Zr Monolithic Fuel Plates

Experimental and Theoretical Analysis of Zircaloy-4 and AISI 304 Stainless Steel Material Pair in Water Sliding Conditions

Thermomechanical Assessment of Fuel Rod Cladding Made of Zirconium Alloy and Silicon Carbide Material During Reactivity-Initiated Accident

Numerical Investigation of Ballooning and Burst for Chromium Coated Zircaloy Cladding

A numerical investigation of thermal stress induced cracking pattern in the solidifying nuclear fuel droplet during MFCI

In-situ determination of strain during transient burst testing and the temperature dependence of Zircaloy-4 claddings

A correlation-based approach for evaluating mechanical properties of nuclear fuel cladding tubes

Hydrogen uptake of zirconium alloys in defective fuel rods: Experiment and numerical model

Long-Term Oxidation of Zirconium Alloy in Simulated Nuclear Reactor Primary Coolant—Experiments and Modeling

Fracture simulation for zirconia toughened alumina microstructure

A Predictive Model for Corrosion Fatigue Crack Growth Rates in RPV Steels Exposed to PWR Environments

Fracture Studies on Cruciform Bend Specimens of Pressure Vessel Steel subjected to Thermo-mechanical Loading

Multiaxial Plastic Deformation of Zircaloy-4 Nuclear Fuel Cladding Tubes

Fuel performance analysis of Cr-coated Zircaloy-4 cladding during a prototypical LOCA event using BISON