Abstract:Corrosion-fatigue is a significant design consideration in deepwater floating production systems. Mechanical loading is accentuated due to the compliant nature of these structures, and sour service conditions can also occur either due to the nature of the crude production or due to seawater flooding of the reservoir to enhance production yield. New high-strength riser steels have recently been developed to meet the demands of deepwater development. The objective of this study was to characterize the corrosion-fatigue resistance of these materials in terms of crack growth rates as a function of applied stress intensity factor range (ΔK), as well as cyclic loading frequency. Experiments were performed on five different steels with yield strengths ranging from 848 to 1080 MPa. Two environments were considered: seawater with cathodic protection to simulate the environment outside of the riser, and a sour brine environment with low oxygen (< 10 ppb) to simulate the environment inside the riser. Not all steels were tested in the sour brine environment since not all were designed to operate in sour service. For both environments, higher strength steels were found to exhibit higher growth rates and lower saturation frequencies. Fatigue crack growth rates as a function of ΔK were also measured, and exhibited two different frequency responses. At high ΔK, the classical frequency response occurred: decreased frequency gave increased crack growth rates. At low ΔK, an inverse frequency effect was observed: deceased frequency gave decreased crack growth rates, as well as increased corrosion-fatigue crack growth thresholds. These differences are believed to be caused by different underlying processes controlling crack growth — specifically, material-environment reaction kinetics at high ΔK, and crack closure due to corrosion-product wedging at low ΔK. The practical significance of these results is discussed, including selection of frequencies for corrosion-fatigue crack growth testing, and applicability of results to structural integrity assessments.

A Predictive Model for Corrosion Fatigue Crack Growth Rates in RPV Steels Exposed to PWR Environments

Estimation model for steel wire crack propagation and its application in calculation of pre-corrosion fatigue life

Study on Creep Behavior and Fracture Life Prediction Method of P92 Steel Based on Finite Element Analysis

Corrosion-Fatigue Prediction Methodology for 12% Cr Steam Turbine Blades

A New Empirical Life Prediction Model For 9-12%Cr Steels Under Low Cycle Fatigue And Creep Fatigue Interaction Loadings

Life Prediction of Corrosion-Fatigue Based on a New Crack Growth Rate Model with Damage and the Extended Finite Element Method

Development of Analogy Method for Thermal-Fatigue Crack Propagation in Pressurized Cylinder by Using Permeation Diffusion-Fracture Model

Continuum Damage Mechanics Based Fatigue Life Prediction and Fatigue Property Analysis of Pitting Corrosion Steel Bars

A continuum damage model for prediction of crack initiation life of pitting corrosion and fatigue

Fatigue Crack Propagation Prediction of Corroded Steel Plate Strengthened with Carbon Fiber Reinforced Polymer (CFRP) Plates

Corrosion-crack path based probabilistic model to predict the durability behavior of RC components

A Probabilistic Model For Corrosion Prediction Of Steel Reinforcement

An improved crack growth model of corrosion fatigue for steel in artificial seawater

Corrosion Fatigue Crack Growth in Clad Low-Alloy Steels—Part II: Water Flow Rate Effects in High-Sulfur Plate Steel

Analysis of Crack Propagation Behaviors in RPV Dissimilar Metal Welded Joints Affected by Residual Stress

On the history and status of reactor pressure vessel steel ductile to brittle transition temperature shift prediction models

Energy-Based Unified Models for Predicting the Fatigue Life Behaviors of Austenitic Steels and Welded Joints in Ultra-Supercritical Power Plants

The Effect of Cyclic Loading Frequency on Corrosion-Fatigue Crack Growth in High-Strength Riser Materials

Fatigue Life Prediction of High Strength Steel with Pitting Corrosion under Three-Point Bending Load

Development of a Probabilistic Methodology for Predicting Hot Corrosion Fatigue Crack Growth Life of Gas Turbine Engine Disks

Thermal corrosion fatigue crack growth behavior and life prediction of 304SS pipeline structures in high temperature pressurized water