Abstract:For the fracture problem of structural steel under strong earthquakes, a continuous damage model which comprehensively considers the influence of stress triaxiality and Lode parameter was proposed in this paper. According to the variation law of Mises stress under cyclic loading, this model decomposes the effective cumulative plastic strain into isotropic hardening and kinematic hardening components, assuming a linear proportional relationship between the fatigue damage induced by these two components. The basic mechanical properties and constitutive relationships of five common Chinese structural steels and four corresponding weld metals were investigated. The fracture failure tests for both notched round bar specimens and pure shear specimens subjected to monotonic tensile and ultra-low-cyclic loading were thoroughly examined on these materials. The continuous damage model parameters were calibrated by means of test results and complementary finite element simulations. Experimental and numerical simulation results indicate that Q690 high strength steel exhibits cyclic softening behavior, whereas the other steels show cyclic hardening characteristics. For pure shear specimens, plane strain specimens and shear energy dissipation cover plates, the continuous damage model was adopted to simulate and analyze the damage development and fracture failure process of the specimens. The predictions for crack initiation, crack propagation and fatigue life are consistent with experimental results, lending further credibility to the model. The calibrated continuous damage model of various steels provides an effective means for analyzing the ULCF fracture failure of structural steel under intense earthquakes.

Continuum Damage Mechanics Based Fatigue Life Prediction and Fatigue Property Analysis of Pitting Corrosion Steel Bars

A Model for Ultra Low Cycle Fatigue Damage Prediction of Structural Steel

Prediction of the Ultra-Low-Cycle Fatigue Damage of Q345qC Steel and Its Weld Joint

Study on the Prediction Method of the Ultra-Low-Cycle Fatigue Damage of Steel

Continuum Damage Modeling and Progressive Failure Analysis of Carbon Fiber/epoxy Composite Pressure Vessel

A Deformation History-Based Approach for Ultra-Low Cycle Fatigue Damage Evaluation of Steel Structures

A Proposal on Ultra-Low Cycle Fatigue Damage Evaluation of Structural Steels

Improved Ultra-Low Cycle Fatigue Fracture Models for Structural Steels Considering the Dependence of Cyclic Damage Degradation Parameters on Stress Triaxiality

A continuum damage model for prediction of crack initiation life of pitting corrosion and fatigue

Characterization of Fatigue Crack Propagation of Pitting-Corroded Rebars Using Weak Magnetic Signals

A Novel Method for Characterizing the Fatigue Crack Propagation of Steel Via the Weak Magnetic Effect

An Insight into the Creep-Fatigue Damage Localization in Welded Joints Based on Crystal Plasticity Finite Element Method

Theoretical and Experimental Investigation on the Magnetomechanical Effect of Steel Bars Subjected to Cyclic Load

Assessment of prior fatigue damage and a new approach to predict remanent creep rupture of P92 steel

Quantifying Fatigue Damage in Reinforced Concrete Beams Through Piezomagnetic Effect: A Fatigue-Magnetomechanical Coupling Approach

Structural mechanics model for anisotropic damage and fatigue life prediction method of face-centered cubic metal materials

Prediction of fatigue damage in ribbed steel bars under cyclic loading with a magneto-mechanical coupling model

Life Prediction of Corrosion-Fatigue Based on a New Crack Growth Rate Model with Damage and the Extended Finite Element Method

Enhanced CDM model accounting of stress triaxiality and Lode angle for ductile damage prediction in metal forming

Fatigue Life Prediction of High Strength Steel with Pitting Corrosion under Three-Point Bending Load

Continuous damage model for structural steels and weld metals under ultra-low-cyclic loading