Enhanced CDM model accounting of stress triaxiality and Lode angle for ductile damage prediction in metal forming

Kai Zhang,Houssem Badreddine,Naila Hfaiedh,Khemais Saanouni,Jianlin Liu

DOI: https://doi.org/10.1177/1056789520958045

IF: 3.988

2020-09-22

International Journal of Damage Mechanics

Abstract:This paper deals with the prediction of ductile damage based on CDM approach fully coupled with advanced elastoplastic constitutive equations. This fully coupled damage model is developed based on the total energy equivalence assumption under the thermodynamics of irreversible processes framework with state variables. In this model, the damage evolution is enhanced by accounting for both stress triaxiality and Lode angle. The proposed constitutive equations are implemented into Finite Element (FE) code ABAQUS/Explicit through a user material subroutine (VUMAT). The material parameters are determined by the hybrid experimental-numerical method using various tensile and shear tests. Validation of the proposed model has been done using different tests of two aluminum alloys (Al6061-T6 and Al6014-T4). Through comparisons of numerical simulations with experimental results for different loading paths, the predictive capabilities of the proposed model have been shown. The model is found to be able to capture the initiation as well as propagation of macro-crack in sheet and bulk metals during their forming processes.

materials science, multidisciplinary,mechanics

What problem does this paper attempt to address?

The aim of this paper is to improve the prediction method for ductile damage, particularly in metal forming processes. The authors propose a new fully coupled continuum damage mechanics (CDM) model that considers the influence of stress triaxiality and Lode angle. Based on the assumption of total energy equivalence of state variables in the thermodynamically irreversible process framework, this damage model is developed. In the model, damage evolution takes into account stress triaxiality and Lode angle to more accurately describe the microdefect evolution and macrocrack generation and propagation of the material. Building upon the traditional CDM model, this model enhances damage evolution by introducing stress state dependency to improve the prediction of metal fracture under different loading paths. Specifically, stress triaxiality is considered by defining a new method for microcrack closure effect, and the influence of Lode angle on damage evolution is described by introducing stress state-dependent ductility parameters. The model is implemented using the user-defined subroutine (VUMAT) of ABAQUS/Explicit software and material parameters are determined through an experimental-numerical hybrid method. Through experimental validation with different aluminum alloys, namely 6061-T6 and 6014-T4, the accuracy and predictive capabilities of this model in simulating ductile fracture under various loading conditions are demonstrated. In summary, the paper addresses the issue of improving the prediction model for ductile damage in metal forming processes by considering the complexity of stress state.

Enhanced CDM model accounting of stress triaxiality and Lode angle for ductile damage prediction in metal forming

Prediction of the Ultra-Low-Cycle Fatigue Damage of Q345qC Steel and Its Weld Joint

A Fully Coupled Damage Model with Stress Triaxiality and Lode Dependence

Failure prediction of magnesium alloys based on improved CDM model

Fracture Prediction for an Advanced High-Strength Steel Sheet Using the Fully Coupled Elastoplastic Damage Model with Stress-State Dependence

Anisotropic Damage Model under Continuum Slip Crystal Plasticity Theory for Single Crystals

A new elastoplastic-damage model with the correction of stress triaxiality and Lode angle

Damage Based Constitutive Model for Predicting the Performance Degradation of Concrete

A Modified Model of Residual Strength Prediction for Metal Plates with Through-Thickness Cracks

A Metallic Constitutive Model Considering Damage Evolution and Bilinear Mixed Hardening

A coupled ductile damage model for metal matrix composites: Development and application

Modeling of metallic shear failure by void-based meso-damage model

A constitutive model coupling damage and material anisotropy for wide stress triaxiality

Anisotropic ductile damage fully coupled with anisotropic plastic flow: Modeling, experimental validation, and application to metal forming simulation

Comparison of Two Uncoupled Ductile Damage Initiation Models Applied to DP900 Steel Sheet under Various Loading Paths

Ductile damage model for metal forming simulations including refined description of void nucleation

Experimental and Numerical Study of Progressive Failure of Ductile Metals

Broad Stress Triaxiality Ratio Band Fracture Experiments in DP900 Metal Sheets and Corresponding Predictive Capability of Advanced Phenomenological and Micromechanical Fully Coupled Damage Models

Modelling of dynamic behaviour of orthotropic metals including damage and failure

Micromorphic Constitutive Equations with Damage Applied to Metal Forming

Mixed hardening constitutive model of steel considering damage evolution