Abstract:The main goal of this paper is the modeling, numerical simulation, and experimental validation of the anisotropic ductile damage effects on initially anisotropic plastic flow with mixed (isotropic and kinematic) nonlinear hardening under large plastic strains for metal forming processes simulation. A symmetric second-rank damage tensor together with a symmetrized fourth-rank damage-effect tensor is used to describe the anisotropic ductile damage evolution and its effect on the large plastic flow with hardening. Following the concept of effective state variables in the framework of the total energy equivalence assumption, the “Murakami” fourth-rank damage-effect tensor is chosen to describe the anisotropic damage effect on the elastic-plastic behavior including the mixed hardening. The “Lemaitre” ductile anisotropic damage evolution relationships, where the principal directions of the damage rate tensor are governed by those of the plastic strain rate tensor, are used. As difference with the works cited above, the nonlinear mixed isotropic and kinematic hardening is taken into account considering the full and strong damage effects through the effective state variables deduced from the total energy equivalence assumption initially proposed by Saanouni et al. The non-associative plasticity theory is considered, and the “ Hill 1948 ” quadratic (equivalent) stress norm is used to describe the large plastic anisotropic flow accounting for mixed isotropic and kinematic hardening with anisotropic damage effects. The formulation is performed assuming finite plastic strains and small elastic strains through the so-called rotated frame formulation. The obtained model was implemented into ABAQUS/Explicit® FE software thanks to the user’s developed subroutine VUMAT. The numerical aspects related to the time discretization of the fully coupled anisotropic constitutive equations are carefully described. Finally and for the validation purpose, the model is identified using an appropriate experimental data base concerning the grade 316L stainless steel to simulate numerically some metal forming processes.

A new numerical approach for determination of the Lemaitre’s ductile damage parameter in bulk metal forming processes

A New Approach for Studying Fatigue Damage

Enhanced CDM model accounting of stress triaxiality and Lode angle for ductile damage prediction in metal forming

Modeling of the ductile damage – Application for bar shearing

Experimental-numerical analysis of ductile damage modeling of aluminum alloy using a hybrid approach: ductile fracture criteria and adaptive neural-fuzzy system (ANFIS)

Identification and measurement of ductile damage parameters

Numerical modeling of the evolution of ductile damage under proportional and non-proportional loading

A micro mechanical study on DP600 steel under tensile loading using Lemaitre damage model coupled with combined hardening

Anisotropic ductile damage fully coupled with anisotropic plastic flow: Modeling, experimental validation, and application to metal forming simulation

Continuum Damage Mechanics Based Fatigue Life Prediction and Fatigue Property Analysis of Pitting Corrosion Steel Bars

Ductile damage model for metal forming simulations including refined description of void nucleation

A direct analytical methodology for the assessment of ductile fracture in metals based on multiaxial tests

A Metallic Constitutive Model Considering Damage Evolution and Bilinear Mixed Hardening

Experimental and Numerical Investigation of Ductile Fracture of Carbon Steel Structural Components

A strain-dependent ductile damage model and its application in the derivation of fracture toughness by micro-indentation

Practical Applicability and Limitations of the Elastic Modulus Degradation Technique for Damage Measurements in Ductile Metals

Modelling of dynamic behaviour of orthotropic metals including damage and failure

Mechanism-Based Numerical Approach to Ductile Fracture in an 2024–T3 Aluminium Alloy

Ductile damage prediction of AA 5754 sheet during cold forming condition

Numerical Prediction and Experimental Investigation of Ductile Damage During Cold Upsetting of TC16 Titanium Alloy for Manufacturing Fasteners

A constitutive model coupling damage and material anisotropy for wide stress triaxiality