Abstract:The Generation IV Sodium-cooled Fast Reactor (SFR) R&D program of the CEA (French Alternative Energies and Atomic Energy Commission), embodied in France by the ASTRID program (600 MWe, 2010–2019), must meet more stringent safety requirements than previous programs. For this reason, the behavior of the reactor in accident phenomenology is studied. We can distinguish three main initiator families that can lead to severe accident conditions in an SFR core: reactivity insertions, local subassembly failures and loss of primary flow. They can evolve in different ways depending on the transient and the reactor characteristics, especially the latter (boiling stabilization, primary power excursion). In order to assess the accidental behavior of innovative SFRs, in particular in case of sodium boiling, dedicated tools have been developed at CEA in recent years. In general, these tools are based on "fine" 3D codes that have highlighted the possibility of stabilized boiling. However, it is difficult to analyze stability with such tools in a dynamic scenario and it is also very complicated to validate complex numerical tools on a dynamic nonlinear phenomenology. In this paper, we propose a methodology that allows to study the stability of SFR nuclear cores under boiling conditions resulting from an unprotected loss-of-coolant accident. This methodology relies on a semi-analytical approach directly applied on a discretized model with possibly thousands of unknowns, rather than on a handful of unknowns derived from a reduced-order model as usually done in the literature when it comes to stability analyses. The nuclear reactor is modeled by a 1D drift thermal-hydraulic model, a 1D neutron diffusion model, and a OD heat transfer model. The semi-analytical methodology developed in this article is based on a continuation method, the Numerical Asymptotic Method, which allows us to compute all the stationary solutions of interest (single-phase liquid, two-phase) with good numerical efficiency (accuracy and computational time). We then perform a linear stability analysis of some of these stationary solutions, which amounts to solving generalized eigenvalue problems with a singular mass matrix. This allows us to study the effect of neutron coupling on the stability of steady-state solutions in the framework of Dynamical Systems Theory through bifurcation diagrams. We can see that neutron coupling extends the stability zone in the studied situation.

A numerical investigation of thermal stress induced cracking pattern in the solidifying nuclear fuel droplet during MFCI

Numerical Investigation of Melt Fragmentation in Sodium-Cooled Fast Reactor Based on Moving Particle Method

A mechanism for spontaneous thermal fragmentation with coolant entrainment during the molten fuel–sodium interaction

CFD Simulation of Melt Pool Coolability in a Simulated Core Catcher Model

Analysis of micro-defect-induced cracking in the IPyC layer of TRISO particle with the XFEM

Evaluation of Fracture Resistance Behavior of Zircaloy Fuel Clad Tubes of Indian PHWRs Using Experiments on Ring Specimens and Continuum Damage Mechanics Models

Investigation on the Irradiation-thermal–mechanical Coupling Behaviors of the Solid Microencapsulated Fuel Rod

A study on the fracture pattern change of high-burnup fuel cladding failed by pellet-cladding mechanical interaction failure under reactivity-initiated accident conditions

3-Dimensional Multiphysics Modeling of Behaviors of Pressurized Water Reactor Fuel Rods With Missing Pellet Surface

CFD Modeling and Analysis of a Heat-Generating Melt Pool Under External Vessel Cooling and Top Flooding

Modeling of irradiation-induced thermo-mechanical coupling behavior in metal matrix microencapsulated fuel

Numerical Simulation Research on the Irradiation-Thermal-Mechanical Performance Evolution of FCM Fuel

Numerical study on the interface debonding effect on FCM fuel behavior

Multiscale computational study to predict the irradiation-induced change in engineering properties of fusion reactor materials

A Mesoscale Stress Model for Irradiated U 10mo Monolithic Fuels Based on Evolution of Volume Fraction/radius/internal Pressure of Bubbles

The critical influencing factors responsible for the particle cracking in UMo/Zr dispersion fuel plates during post-irradiation anneal tests

Assessment of thermal shock resistance of refractory magnesia lining under simulated core melt impingement for application to SFR core catcher

Study of the effect of seawater properties on the performance of molten fuel fragmentation

Experimental and simulation studies on damage mechanisms of tungsten and molybdenum under compressed plasma flow irradiation

A Numerical Study of Cracks Appearance on Tungsten Surface after High Intense Pulsed Ion Beam Irradiation

Stability and bifurcation analysis of a Sodium-cooled Fast Reactor under two-phase flow using 1D multiphysics model