Abstract:The in-vessel retention (IVR) of core disruptive accident (CDA) is of prime importance in enhancing safety characteristics of sodium-cooled fast reactors (SFRs). In the CDA of SFRs, molten core material relocates to the lower plenum of reactor vessel and may impose significant thermal load on the structures, resulting in the melt-through of the reactor vessel. In order to enable the assessment of this relocation process and prove that IVR of core material is the most probable consequence of the CDA in SFRs, a research program to develop the evaluation methodology for the material relocation behavior in the CDA of SFRs has been conducted. This program consists of three developmental studies, namely the development of the analysis method of molten material discharge from the core region, the development of evaluation methodology of molten material penetration into sodium pool, and the development of the simulation tool of debris bed behavior. The analysis method of molten material discharge was developed based on the computer code SIMMER-III since this code is designed to simulate the multi-phase, multi-component fluid dynamics with phase changes involved in the discharge process. Several experiments simulating the molten material discharge through duct using simulant materials were utilized as the basis of validation study of the physical models in this code. It was shown that SIMMER-III with improved physical models could simulate the molten material discharge behavior, including the momentum exchange with duct wall and thermal interaction with coolant. In order to develop an evaluation methodology of molten material penetration into sodium pool, a series of experiments simulating jet penetration behavior into sodium pool in SFR thermal condition were performed. These experiments revealed that the molten jet was fragmented in significantly shorter penetration length than the prediction by existing correlation for light water reactor conditions, due to the direct contact and thermal interaction of molten materials with coolant. The fragmented core materials form a sediment debris bed in the lower plenum. It is necessary to remove decay heat safely from this debris bed to achieve IVR. A simulation code to analyze the behavior of debris bed with decay heat was developed based on SIMMER-III code by implementing physical models, which simulate the interaction among solid particles in the bed. The code was validated by several experiments on the fluidization of particle bed by two-phase flow. These evaluation methodologies will serve as a basis for advanced safety assessment technology of SFRs in the future.

Assessment of thermal shock resistance of refractory magnesia lining under simulated core melt impingement for application to SFR core catcher

Eutectic melting and relocation behavior of B4C pellet-stainless steel under radiative heating

A numerical investigation of thermal stress induced cracking pattern in the solidifying nuclear fuel droplet during MFCI

CFD Simulation of Melt Pool Coolability in a Simulated Core Catcher Model

The influence of nanoparticles and functional metallic additions on the thermal shock resistance of carbon bonded alumina refractories

Experimental Study on Molten Corium-Concrete Interaction with Simulant Metal and Oxide

Mechanical and electrical performance of glass fiber reinforced plastic insulation for cryogenic application in fusion magnet irradiated in fast breeder reactor

Quantitative Assessment of Microporous MgO Castable Erosion and Corrosion Behaviors in Two Tundish Covering Fluxes

Refractory geopolymers: Thermal shock resistant material for nuclear safety

Numerical Analysis of the Melt Behavior in a Fuel Support Piece of the BWR by MPS

CFD Modeling and Analysis of a Heat-Generating Melt Pool Under External Vessel Cooling and Top Flooding

Simultaneous enhance of the thermal shock resistance and slag-penetration resistance for tundish flow-control refractories: the role of microporous magnesia

Thinning behavior of solid boron carbide immersed in molten stainless steel for core disruptive accident of sodium-cooled fast reactor

Development of Magnesium Aluminate (MgAl2O4) Nanoparticles for refractory crucible application

Core analysis of fully ceramic microencapsulated fuel (FCM) for SMART reactor under normal operation and reactivity insertion accident

On the Use of a Chloride or Fluoride Salt Fuel System in Advanced Molten Salt Reactors, Part 3; Radiation Damage

High-temperature Mechanical Behavior and Thermal Shock Resistance of Eco-Friendly Periclase-Mg1.08al1.84ti0.08o4 Spinel Refractories Used in RH Degassing Process

Development of the Evaluation Methodology for the Material Relocation Behavior in the Core Disruptive Accident of Sodium-Cooled Fast Reactors

Crust Behavior and Erosion Rate Prediction of EPR Sacrificial Material Impinged by Core Melt Jet

A mechanism for spontaneous thermal fragmentation with coolant entrainment during the molten fuel–sodium interaction

R&D OF SICF/SIC COMPOSITE FOR FUSION REACTOR MATERIAL