Abstract:The in-vessel retention (IVR) of core disruptive accident (CDA) is of prime importance in enhancing safety characteristics of sodium-cooled fast reactors (SFRs). In the CDA of SFRs, molten core material relocates to the lower plenum of reactor vessel and may impose significant thermal load on the structures, resulting in the melt-through of the reactor vessel. In order to enable the assessment of this relocation process and prove that IVR of core material is the most probable consequence of the CDA in SFRs, a research program to develop the evaluation methodology for the material relocation behavior in the CDA of SFRs has been conducted. This program consists of three developmental studies, namely the development of the analysis method of molten material discharge from the core region, the development of evaluation methodology of molten material penetration into sodium pool, and the development of the simulation tool of debris bed behavior. The analysis method of molten material discharge was developed based on the computer code SIMMER-III since this code is designed to simulate the multi-phase, multi-component fluid dynamics with phase changes involved in the discharge process. Several experiments simulating the molten material discharge through duct using simulant materials were utilized as the basis of validation study of the physical models in this code. It was shown that SIMMER-III with improved physical models could simulate the molten material discharge behavior, including the momentum exchange with duct wall and thermal interaction with coolant. In order to develop an evaluation methodology of molten material penetration into sodium pool, a series of experiments simulating jet penetration behavior into sodium pool in SFR thermal condition were performed. These experiments revealed that the molten jet was fragmented in significantly shorter penetration length than the prediction by existing correlation for light water reactor conditions, due to the direct contact and thermal interaction of molten materials with coolant. The fragmented core materials form a sediment debris bed in the lower plenum. It is necessary to remove decay heat safely from this debris bed to achieve IVR. A simulation code to analyze the behavior of debris bed with decay heat was developed based on SIMMER-III code by implementing physical models, which simulate the interaction among solid particles in the bed. The code was validated by several experiments on the fluidization of particle bed by two-phase flow. These evaluation methodologies will serve as a basis for advanced safety assessment technology of SFRs in the future.

Thinning behavior of solid boron carbide immersed in molten stainless steel for core disruptive accident of sodium-cooled fast reactor

Eutectic melting and relocation behavior of B4C pellet-stainless steel under radiative heating

Kinetic study on eutectic reaction between boron carbide and stainless steel by differential thermal analysis

A Quantitative Method of Eutectic Reaction Study Between Boron Carbide and Stainless Steel

Characteristics of Self-Leveling Behavior of Debris Beds in A Series of Experiments

Experimental investigation of bubbling in particle beds with high solid holdup

Simulation on the Fragmentation Characteristics of Molten Core Materials in SFRs Using Modified MPS Method

Influence of Length-Scale on Stabilization of Boron Carbide in Al-based Metal Matrix Composites During Plasma Activated Sintering

Numerical Analysis of the Melt Behavior in a Fuel Support Piece of the BWR by MPS

Development of the Evaluation Methodology for the Material Relocation Behavior in the Core Disruptive Accident of Sodium-Cooled Fast Reactors

EXPERIMENTAL RESEARCH ON ENERGY RELEASE AND FRAGMENTS CHARACTERISTICS UNDER MOLTEN MATERIALS DISCHARGED INTO LIQUID SODIUM

From debris bed formation to self-leveling behaviors in core disruptive accident of sodium-cooled fast reactor

Numerical Analysis of Three-Dimensional Flow Field Impact under Strong Transient Conditions in Advanced Reactors

Thermostructural evolution of boron carbide characterized using in-situ x-ray diffraction

Thermodynamic equilibrium state calculations for oxidation and corrosion reactions of B4C and oxide-based neutron absorber compounds in reactor control rods

CFD Simulation of Melt Pool Coolability in a Simulated Core Catcher Model

Experimental emulation of 10B(n, α)7Li reaction-induced microstructural evolution of Al-B4C neutron absorber used in the dry storage of spent nuclear fuel

Numerical Analysis of the Corium Behavior Within the Fuel Support Piece by Mps

Theoretical assessment of boron incorporation in nickel ferrite under conditions of operating nuclear pressurized water reactors (PWRs)

Study on Heat Transfer Behavior of a Rectangular Particle Bed with Volumetric Heating

Experimental investigation on self-leveling behavior in debris beds