Abstract:When core melt occurs in severe accident in Sodium Cooled Fast Reactor (SFR), molten core material moves to the lower plenum in reactor vessel and fragmented by fuel coolant interaction. These fragmented particles, so called debris, accumulate on the structure surface to form debris bed. If the thickness of the debris bed exceeds the coolable thickness of the decay heat, boiling of sodium occurs inside the debris bed. It is found from past in-pile experiments that the sodium flow and boiling inside the debris bed caused by a decay heat planarize the debris bed to lower the debris bed thickness. This mechanism is called self-leveling of debris bed. In the accident sequence of SFR, when fuel debris locally accumulates beyond the coolable thickness, fuel debris remelts with decay heat and they cannot be retained in-vessel. However, it is expected that the debris bed thickness lowers the coolable thickness with self-leveling phenomenon and they can be safely retained in-vessel. This is why an appropriate assessment for self-leveling behavior is important for safety analysis of SFR with the object of safety cooling of fuel debris. Therefore, the object of this study is to develop new analytical methods to simulate unique phenomena in self-leveling behavior and implement it to SFR safety analysis code. The characteristic of self-leveling is that when the larger external forces caused by environmental fluids are larger than a threshold value, the debris bed is fluidized. The new methods are developed with assuming that the debris bed behaves as Bingham fluid from this feature. They are categorized into two main parts. The first part is particle interaction models to model the effect of particle-particle contacts and collisions. Particle pressure and particle viscosity related to particle-particle collisions and contacts, respectively, are applied to pressure and viscosity term in the particle momentum equation. The second part is a large deformation method, which simulates Bingham fluid characteristic of debris bed. This method numerically judges a onset of debris bed fluidization which depends on a shear stress strength. An experimental study of self-leveling behavior, in which the particle bed behavior driven by bubbles inflow from the bottom of bed in gas-solid-liquid three-phase flow was observed, is analyzed to validate the new methods. Simulation results well reproduced the transient changes of particle bed, whose elevation angle and form deformation becomes gradually small and obscure, respectively. Their dependencies on particle size and density are also well simulated with new methods. The assessment results show that these methods provide a basis to develop analytical methods of self-leveling behavior of debris bed in the safety assessment of SFRs.

Study on Heat Transfer Behavior of a Rectangular Particle Bed with Volumetric Heating

Investigations on the Debris Bed Formation Behavior of the Heated Solid Particles

Numerical Investigation Of Heat Transfer Characteristics Of Debris Bed After Severe Accident Of Sfr Based On 1-D Heat Conduction Model

Experimental Study on Coolability of Particulate Core-Metal Debris Bed with Oxidization, (ii) - Fragmentation and Enhanced Heat Transfer in Zircaloy Debris Bed

Numerical Investigation of Dryout Heat Flux and Heat Transfer Characteristics in Core Debris Bed of SFR after Severe Accident

Development of the Evaluation Methodology for the Material Relocation Behavior in the Core Disruptive Accident of Sodium-Cooled Fast Reactors

Experimental Studies and Empirical Models for the Transient Self-Leveling Behavior in Debris Bed

CFD Modeling and Analysis of a Heat-Generating Melt Pool Under External Vessel Cooling and Top Flooding

Numerical investigation of cooling ability in heat-generating porous debris bed after severe accident in PWR

NUMERICAL SIMULATION OF DEBRIS BED RELOCATION BEHAVIOR IN SODIUM-COOLED FAST REACTOR

Experimental investigation on self-leveling behavior in debris beds

Experimental and Numerical Research on the Debris Bed Formation in Severe Accidents of Nuclear Reactors

A Simple Approach To The Prediction Of Transient Self-Leveling Behavior Of Debris Bed

Development of Assessment Method for a Self-Leveling Behavior of Debris Bed and Analyses of Experiments

An Experimental Study on Pressure Drop and Dryout Heat Flux of Two-Phase Flow in Packed Beds of Multi-Sized and Irregular Particles

Development Of Relocation Model For Debris Particles In Core Disruptive Accident Analysis Of Sodium-Cooled Fast Reactor

Characteristics of Self-Leveling Behavior of Debris Beds in A Series of Experiments

Study on Relocation Behavior of Debris Bed by Improved Bottom Gas-Injection Experimental Method

Study on the Remelting Process of the Debris Bed in the Lower Head of Reactor Pressure Vessel Based on Lattice Boltzmann Method

An Experimental Study on Coolability of a Particulate Bed with Radial Stratification or Triangular Shape

EXPERIMENTAL INVESTIGATION ON DRYOUT PHENOMENON OF HOMOGENEOUS AND AXIAL STRATIFIED DEBRIS BED