Abstract:The large-scale utilization of traditional fossil fuels causes global warming and environment pollution, which is constraining the sustainable development of human society. Recently, new energy utilization technologies, including solar power and nuclear power, have witnessed rapid developments because they can relieve these problems. For the new energy utilization, molten salts are widely used. Therefore, having a deep understanding on the convective heat transfer characteristics of molten salts flowing in complex heat transfer structures is a critical issue to realize the high heat-transfer performance for new energy utilization technologies, especially the next-generation advanced nuclear power plant and high-temperature concentrated solar power (CSP) plant.In this paper, experimental studies on the convective heat transfer characteristics of the molten salt are firstly reviewed. It can be concluded that these studies experienced a development process, which is from smooth tubes to enhanced tubes, from tube side to shell side. Meanwhile, it is pointed out that studying on the convective heat transfer characteristics of molten salt flowing in complex structures is of great importance in the future. Then, previous experimental studies by our team on the convective heat transfer characteristics of the molten salt flowing in 5 heat exchangers with complex structures are introduced systematically, including shell-and-tube heat exchangers (STHE) without baffle plate, STHE with large and small hole baffles, STHE with segmental baffles, STHE with rod baffles, and airfoil printed circuit heat exchanger (PCHE). Based on the above experimental studies, corresponding convective heat transfer correlations for the molten salt flowing in the five complex heat transfer structures were obtained; and the applicable temperature and Reynolds number ranges for these correlations were also provided. The results show that the obtained correlations have simple forms and high precision, which can meet the engineering requirement. Moreover, heat transfer performances of the above five heat exchangers are also compared with each other. The results show that Nusselt numbers of the five heat exchangers have the same changing trend with Reynolds number; and the order of the heat transfer performances of the STHEs is: STHE with large and small hole baffles > STHE with rod baffles > STHE with segmental baffles > STHE without baffle plate. In addition, the heat transfer rate per unit volume of the airfoil PCHE is 70 times that of the STHE. To conclude the experimental research status of the friction and heat transfer characteristics of molten salt flowing in typical heat exchangers with complex structures, it can be found that most of the investigations focused on the convective heat transfer performance, lacking the analysis of friction characteristics. Therefore, the friction performances of the heat exchangers with complex structures should be further studied to obtain the comprehensive performance. Moreover, most of the experimental studies on the convective heat transfer performance of molten salts are related with the traditional heat exchangers. Thus, novel heat exchangers, which can achieve high heat transfer performance and low pressure drop, should be investigated and developed to meet the need of high efficiency, high temperature, and high pressure in the next-generation advanced nuclear power plant and high-temperature CSP plant.

Numerical analysis and validation on heat transfer characteristics and correlation of molten salt in pebble bed channel

Numerical study on heat transfer characteristics of molten salt in annular channel with wire coil

Study of heat transfer enhancement/suppression for molten salt flows in a large diameter circular pipe

Thermal Hydraulics Analyses of Radial Flow Core of Molten Salt Pebble Bed Reactor

Experimental Study of Heat Transfer Enhancement for Molten Salt with Transversely Grooved Tube Heat Exchanger in Laminar-Transition-turbulent Regimes

Numerical Study on Thermal Performance and Thermal Stress of Molten Salt Receiver Tube Based on Induction Heating

The preliminary analysis on the steady-state and kinetic features of the molten salt pebble-bed reactor

Thermal performance analysis of molten salt based on a novel experimental rig

ICONE19-43445 Investigating Thermal-Hydraulic Characteristic of Molten Fluoride Salt in A Circular Pipe Using A CFD Methodology

Experimental and numerical thermal-hydraulics investigation of a molten salt reactor concept core

Numerical simulation on coolant flow and heat transfer in core

Experimental study on forced convection heat transfer of KNO3–Ca(NO3)2 + SiO2 molten salt nanofluid in circular tube

Investigation on thermal–hydraulic performance of nitrate molten salt nanofluids in enhanced tube with converging–diverging bulge

Heat transfer evaluation of natural convection outside the condenser in Passive Residual Heat Removal System of Molten Salt Reactor

Convective heat transfer characteristics of molten salts flowing in complex flow structures: Experimental studies and progress

Numerical simulation of the ocean conditions impact on heat pipe-cooled molten salt reactor core thermal-hydraulic performance

Study on the flow and heat transfer characteristics of hitec salt in solar vacuum collector tube

CFD investigating thermal-hydraulic characteristics of FLiNaK salt as a heat exchange fluid

Heat Transfer and Flow Friction Performance of Molten Salt and Supercritical CO2 in Printed Circuit Heat Exchanger

Core and blanket thermal–hydraulic analysis of a molten salt fast reactor based on coupling of OpenMC and OpenFOAM

Numerical Simulation of the Coolant Flow and Heat Transfer Characteristics in the Reactor Core of Pebble Bed HTGR