Abstract:A severe accident involving core melt in a nuclear reactor is a major concern especially after Fukushima. Thus, to mitigate the effects of core melt accidents, an ex-vessel core catcher is being developed for Advanced Indian Nuclear Reactors. The core catcher design envisages using special refractory material. The cooling strategy of the core catcher is one of the key components in the design of the core catcher. Performing a full-scale prototypic experiment is extremely challenging and prohibitory due to the involvement of very high temperature and presence of radioactive materials. Therefore, a computational fluid dynamics (CFD) model capable of simulating the coolability of the melt pool is important to develop. In the present work, a two-dimensional (2D) CFD model was developed to understand the heat transfer phenomenon and solidification of the heat-generating simulant melt pool. The 2D symmetry geometry of the simulated core catcher vessel was used. The CFD model considers appropriate models for melting and solidification to understand crust formation in the melt pool and the k-ε turbulence model to resolve turbulence inside the melt pool. A decay heat of 1 MW/m 3 was also considered inside the melt pool. The CFD simulation results were compared with the authors' experimental results. The experiment involved a scaled-down ex-vessel core catcher model (CCM) employing electrical heaters to simulate decay heat. The experiment was carried out by melting about 25 L of sodium borosilicate glass using a cold crucible induction furnace at about 1200°C and cooling it in the scaled-down CCM. The scaled-down CCM was strategically cooled in three phases, namely, air cooled, indirect side cooling, and complete top flooding. To overcome the complexities of simulation of the initial melt pour condition, the CFD simulation was initialized with the temperatures just after the melt pour was completed in the experiment. Similar to the experimental conditions, the CFD simulations were carried out in three phases by changing the boundary condition. Comparison of the temperatures of the melt pool by the CFD simulations and experiments at different locations gave reasonable agreement. The evolution of crust formation, melt pool temperatures, core catcher inner wall temperatures, and heat flux distribution were investigated in detail using the CFD model.

Experimental and numerical thermal-hydraulics investigation of a molten salt reactor concept core

CFD simulations of Molten Salt Fast Reactor core cavity flows

Molten Salt Reactor thermal-fluid dynamics evaluation using a CFD code for a theoretical power density distribution

CFD Simulations of the Molten Salt Fast Reactor

ICONE19-43445 Investigating Thermal-Hydraulic Characteristic of Molten Fluoride Salt in A Circular Pipe Using A CFD Methodology

Thermal Hydraulics Analyses of Radial Flow Core of Molten Salt Pebble Bed Reactor

Core and blanket thermal–hydraulic analysis of a molten salt fast reactor based on coupling of OpenMC and OpenFOAM

Study of Heat Transfer Enhancement/suppression for Molten Salt Flows in a Large Diameter Circular Pipe: Part I: Benchmarking

Research on CFD Calculation and Analysis Technology of Porous Media in Sodium Cooled Fast Reactor Core

Numerical analysis and validation on heat transfer characteristics and correlation of molten salt in pebble bed channel

Fundamental and Applied Investigations of Thermal Hydraulics for Fast Reactors with Liquid-Metal Coolants

CFD Modeling and Analysis of a Heat-Generating Melt Pool Under External Vessel Cooling and Top Flooding

Numerical investigation on the core thermal hydraulic behavior of pool-type sodium-cooled fast reactor (SFR)

Thermal-Hydraulic Core Design of a Thorium-Based Molten Salt Fast Energy Amplifier

Temperature Distribution in Graphite Moderators and Fuel Salt in Core of Small Molten-Salt Power Reactor.

Thermal Hydraulics Analysis of the Fluoride-Salt-Cooled, High-Temperature Reactor

The preliminary analysis on the steady-state and kinetic features of the molten salt pebble-bed reactor

Temperature Profile Estimation in the Core of a Sodium-Cooled Fast Reactor using CFD Modeling

Numerical Study of Flow and Heat Transfer Characteristics in a Simplified Dual Fluid Reactor

[ICAPP 2023] Experimental and numerical assessment of helium bubble lift during natural circulation for passive molten salt fast reactor

CFD Simulation of Melt Pool Coolability in a Simulated Core Catcher Model