Abstract:Molten-Salt Reactors (MSRs) use molten-salt fluid-fuel, which contains thorium (Th) and uranium-233 (233U) as fertile and fissile, respectively. Also, the MSRs can accept plutonium (Pu) as fissile. Besides the above benefit on nuclear fuel cycle, the MSR has other many advantages such as the power-size flexibility, no necessity of refueling, effective incineration of minor actinides (MA), excellent safety, and good economy. The cycle produces very small amount of MA compared with the conventional U fuel cycle. Also, 233U accompanies high gamma-ray emissions, and this fact contributes to the resistance to nuclear proliferation issues. The MSRs has been studied since early 1950's in Oak Ridge National Laboratory (ORNL), and the Molten-Salt test Reactor Experiment (MSRE) has shown excellent operation in 1965-69. The conceptual design study was issued for Molten-Salt Breeder Reactor (MSBR) as large as 1GWe plant. In Japan, small MSRs of 150MWe to 200MWe(FUJI-, FUJI-12 and FUJI-U3) have been proposed. FUJI-12 is a simple one-region core, and it attained a high conversion ratio of 0.92 by the batch chemical processing at every 7.5 years. However, FUJI-12 has to replace the graphite moderator at every 15 years, and this may cause additional maintenance work and cost. Then, an improved small MSR (FUJI-U3) has been proposed. The improvement is to introduce a 3-region core design concept in order to eliminate graphite replacement by reducing the maximum neutron flux. It is concluded that there is no need to replace graphite moderator for 30 years operation of FUJI-U3. In this paper, we investigated the other possibility of a two region core for the simplicity. Using one energy group neutron diffusion theory and assuming bare reactor, the optimum selection of region wise neutron multiplication factors can be theoretically and easily obtained. The validity of the selection was also proved by a numerical calculation. In MSRs, there is no burnup distribution of the fuel. The region wise neutron multiplications can be obtained by adjusting the volume fraction of fuel in a cell with a given composition of fuel salt. Thus, it is easy to apply the theoretical result directly in selecting the boundary of the region and the multiplication factor in each region and also to maintain the characteristics during the core burnup. The optimization of the actual core configuration was searched by a nuclear analysis code SRAC95 with the nuclear data library of JENDL3.2. In such case the region wise multiplication factor can be adjusted to compensate the neutron loss by leakage in order to attain criticality. Taking the theoretical result as the initial condition, the optimization was quite easy to accomplish. It is concluded that there is no need to replace graphite moderator for 33 years operation of a two-region core design concept.

Temperature Distribution in Graphite Moderators and Fuel Salt in Core of Small Molten-Salt Power Reactor.

Study on Characteristic of Flow and Heat Transfer in 10-MWt Molten Salt Reactor-Solid Fuel

Optimization of Core Regions and Fuel Fractions for Better Power Peaking Factor of 150, 450 and 1,000 MWth Molten Salt Reactor

Core Optimization for Extending the Graphite Irradiation Lifespan in a Small Modular Thorium-Based Molten Salt Reactor

Steady Thermal Hydraulics Analysis for A Graphite-Moderated Channel Type Molten Salt Reactor

Flattening of Fast Neutron Flux Distribution in Molten Salt Reactor for Longer Graphite Moderator Lifetime

Graphite-Molten Salt Considerations for Components in Nuclear Applications

Numerical Analysis on the Dynamic Behaviors of a Graphite-Moderated Molten Salt Reactor Based on MOREL2.0 Code

Fuel, Core Design and Subchannel Analysis of a Superfast Reactor

Studies on Flibe Blanket Designs in Helical Reactor FFHR

Experimental and numerical thermal-hydraulics investigation of a molten salt reactor concept core

The Study of Continuous Core Zoning to Extend the Graphite Component Irradiation Lifespan in Molten Salt Reactor

Natural Convection With Non-Uniform Heat Generation In Molten Salt Reactor

Neutronic effect of graphite dimensional change in a small modular molten salt reactor

The Influence of Lower Plenum and Distribution Plates to Thermal Hydraulics Characteristics of MSR

Self-sustaining Core Design for 200 MWe Molten-Salt Reactor with Thorium-Uranium Fuel :FUJI-U3-(0)

Preliminary analysis of the irradiation deformation of a typical molten salt reactor graphite component

The Optimization Design Of Lower Plenum And Distribution Plates In Msr

Core and blanket thermal–hydraulic analysis of a molten salt fast reactor based on coupling of OpenMC and OpenFOAM

Thermal-hydraulic Design and Analysis of a Small Modular Molten Salt Reactor (MSR) with Solid Fuel

Characteristic of core flow and heat transfer of different fuel ball arrangement modes in molten salt reactor